To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.
Features:
If you're looking for the best tie-downs for your camper, frame-mounted is the way to go. The frame is the most solid part of your entire vehicle, so it just makes sense to attach your camper to something that's not going to warp, bend, or twist. Even more importantly, the camper's center of gravity will sit lower and its weight will be spread across the entire bed. This avoids a top-heavy load perched on top of your bed rails that's liable to sway and get pushed around by crosswinds. The camper's not going to shift or slide around while you drive; it's going to stay put, and your truck is going to handle just like it does without a camper.
Quick Tip: If you have a plastic or spray-in bed liner, it's important that you use a rubber mat under the camper to eliminate any sliding or bouncing.
Frame-mounted tie-downs are also a great pick for preserving your truck's good looks. The brackets install on the frame, tucked nearly flush with the underside of the vehicle. Remove the arms from the brackets when you're not hauling your camper, and the brackets will be barely visible.
Completely custom to your vehicle, the tie-downs attach to exisiting holes in your frame so that there's little to no drilling and no need for any modifications. Because they're custom, you'll want to use our in-house application guide to make sure you get the exact right model. The tie-downs you need might be different depending on what type of hitch or other accessories you have.
Once the tie-downs are installed, use a set of turnbuckles (sold separately) to secure the camper to the tie-downs. The shank on each arm has 2 pin holes so you can choose how far out they extend, that way the turnbuckles can reach the anchors on your camper without making contact with your truck. Tighten the turnbuckles to the correct level of tension (not too tight!).
Make sure the anchor points are offset from the tie-downs instead of lined up with them so that they will hold your camper from multiple angles. This is important for keeping your camper from shifting. Two holes in the attachment plate of the tie-downs let you find the best angle for you camper anchors.
Average Customer Rating: 4.7 out of 5 stars (1649 Customer Reviews)
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.Steve Z at etrailer was sharp and very knowledgeable on the companies product. Steve was able to work with me on getting the proper camper tie downs for my 2015 Dodge Ram 1500 (Item #TLD2121). He told me when they would be arriving and they actually arrived earlier than expected. Great product, install was pretty easy, I had them installed within an hour. This is a very high quality product with heavy duty construction. They provide a secure attachment for tie downs to the truck camper. The instructions provided are adequate, but not great. I Don't normally give recommendations or endorse products, but these I am truly impressed with. Thank you so much Steve and etrailer.
Make sure the long upright is on the proper side of the bed mount.
Torklift Tie-Downs are the best. ETRAILER Got them to me fast and easy to install. Thinking about buying the rear this year
I gave it a 4 star because it was hard to figure out which one would work for my truck. The gage of the metal is great. No bending and I have been using them for a year now.
The tie downs fit perfectly on the truck frame on the holes that are already punched out from the factory. All of the parts were with the order and it was an easy installation.
Ordered tie-downs for my truck and in a few days had them!!! No hassle. Prompt service!
Super helpful ordering, got here super fast even during Christmas rush. Will be installing tomorrow and hopefully it will go as smoothly. Great to work with pros. Jay
Fits truck perfectly and a well made pr oduct
The units appeared to be well made and were nicely painted. I installed them on my F150. The tools and hardware supplied were of good quality and installation was straight forward. Two people would have been great, but I was able to install both sides in a little less than an hour. The holes all line up very well. I like these better than the previous units I had on my 2013, as they do not stick out as far - so less noticeable. The extension arms come out at a very nice angle just under the body. I find these units with quality I expected and I think they will be highly functional in attaching my camper.
I had the mountings professionally attached to the frame. The hatches can be easily removed when not in use( and I would recommend that to keep them from being stolen). Using chains and turnbuckles, I feel very comfortable with my truck camper staying where it is.. does not rock, very solid.
It’s nice to feel secure about my camper staying firmly attached.
It was worth the investment.
They do exactly what you think they'd do. I actually had to swap them from one truck to another (went from an double cab to a crew cab) and TorkLift actually sent me a whole new hardware kit. The hardest part is fishing the bolt/nut setup on the driver's side as the gas can is in the way, other than that it's easy peasy.
The product was easy to install, a bit awkward with only one person on the front tie downs but if you had an extra set of hands then that problem would be solved.
The top bolt hole on the front passenger side was out by about 1/8" but I resolved that by being able to get a drill on the inside of the frame and drilling through that way to allow the bolt to go through both truck frame and tie down. If it had been on the driver's side then it may have been an issue with the gas tank in the way. All is now installed and ready to go,
Tommy C recommended the TorkLift Camper Tie-Downs. The Instructions are great and very easy to follow. They supply some cool wire helpers to hold bolts in the frame for you. All went very smoothly and a very secure. I love how solid the Camper feels on the truck.
Front and rear tie downs came in two separate boxes. Back tie down box was fine but front tie down box was broken open with one of the T bolts hanging out. Fortunately both T bolts were in the box. There have been numerous reviews about bad packaging and parts missing and beat up so I think whoever is packaging these parts should take heed and do a better job. The rear tie downs went on fine with the help of the video instructions. The front however were harder and required me to grind down the T bolts so they would fit correctly (see pictures). I also had to enlarge the elongated holes to get the bolt in. Also the order of the instructions was in my mind incorrect. I installed the angled bracket supports first and then the main brackets. My recommendation would be to post a video of the installation procedures like they did for the back tie downs. All the parts were well made except the front T bolts and I am hopeful that they will last a long time. The pricing in my mind is high but they appear to be the only game in town so it is what it is. I do recommend these as they seem very strong and well designed.
Great quality product. Arrived on time. Drivers side took a little longer because of fuel tank skid plate removal. Overall very sanitary application.
TLN3404 installed on 2016 Titan XD. Very sturdy product, hardware was short by (2) 1/2” flat washers, (6 shown on instructions, 4 in package)no big deal there. Install goes fast with an impact gun. 3/4”(19mm) and 17mm sockets plus a 3/4 wrench req. tip: if you have a small magnet, width of a pencil, you can easily capture the flange nuts. My driver’s side clears the 6” exhaust tip by a 1/4”, should be fine. Directions are straightforward.
Easy install and just a great product. Install took 90 minutes for front and rear mounts.
No worries about securing the camper to the truck using the Torklift tie-downs. Third camper/truck I have used these on and would not consider any other option.
The drivers rear didn't get built correctly. the hole to put the tie done is missing. I had to drill a hole into the tie down so I could use it. Didn't notice the problem until I went to put the camper on my pickup. The other three are fine.
I like to thank Lori with etrailer and guiding me through the process of getting , Front and rear,
Torklift Camper Tie-downs -Custom Frame Mounts. Well doing research this was the best way to go for tying down and stabilizing a camper. Torklift camper tie-downs are solid well built!
I had ordered Mounts on Monday and received them on Friday . I Had the tie-downs on my , 2019 Chevy Silverado 2500 by Saturday. The whole process was awesome , real easy installation. Great help with videos and instructions on mounting tie-downs on my truck provided by etrailer. I’m going to use them on my pop-up Hallmark Camper. Thank you for all your help etrailer.
The frame mounted front tie downs are as good as expected. They bolted on fairly easily with some fishing of bolts through existing frame holes. I have a F250 supercab/long bed with wheel to wheel running boards. Both Torklift and eTrailer websites said the tiedowns would fit with my running boards but they didn't. eTrailer did offer to pay to return the tie-downs but I chose to keep them. I was hoping for a discount on new cab length running boards for my troubles but they would only offer 5% so I skipped that and modified my existing boards myself. I'm going with 4 stars because of the confusion on the web site and a few typo's in the instructions but the tiedowns are very nice.
Jason was great to work with on getting the proper camper tie downs for my truck as it was a new truck and was a bit confused as to the proper application.
I had them installed within an hour. Even an armature bolt twister could do this!
I have used my camper a lot since putting these on my truck and will tell you these are THE MOST SECURE ANCHORS I have ever used on any of my trucks PERIOD!
You will not make a bad decision going with this product. I recommend these tie downs over any product available! I Don't normally give recommendations or endorse products. These I am truly impressed with.
Do you have a question about this Camper Tie-Down?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.