Do the Coil SumoSprings Custom Helper Springs Affect Unloaded Ride Height

Question

Question:

How much can I expect my ride height to increase with this product when we are not carrying a full load? 2010 Toyota Sienna

asked by: Steve

0

Expert Reply:

The Coil SumoSprings Custom Helper Springs # CSS-1195R that you referenced would not affect your unloaded ride height.

expert reply by: Jameson C

0

Answer 1

All of the trailer hitches for your 2006 Toyota Sienna are going to sit in the same area. You'll get slightly better ground clearance from a hitch with an 1-1/4" receiver and when the installed the Curt #C12065 and Draw-Tite #36513 Class II…

view full answer...

Answer 2

The Dexter Trailer Idler Axle w/ Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,200 lbs #20545I-EZ-60-15 is a great starting point to upgrade your trailer. This will give you a standard size axle with good bearings, hubs, and EZ-lube…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 6

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

I took a look online, the Curt Trailer Hitch item #C13105 you have on your Sienna is rated to be used with a weight distribution system. The best one for your 2,100 lbs pop up camper is going to be the Equal-i-zer Weight Distribution System item…

view full answer...

Answer 9

The etrailer Trailer Hitch Receiver #e98837 which fits your 2010 Toyota Sienna uses six M12 - 1.25 x 40 hex bolts to attach the receiver to the frame. This same hitch is confirmed to fit the 2004-2020 model years. It is possible the threaded holes on…

view full answer...

Answer 10

Hey Erick, the correct size Bearing Buddy to use with the axle part #e75SR is part #BB2441 which has an outer diameter of 2.441 inches.

view full answer...

Answer 11

From my research on the Harbor Freight 4x8 folding trailer uses 4.80-12 tires on a 12 inch wheel for the 1195 lb capacity trailer and a 5.30-12 for the 1720 lbs capacity trailer. It is a good idea to check your existing tires to see which size they…

view full answer...

Do the Coil SumoSprings Custom Helper Springs Affect Unloaded Ride Height

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching