Can Master Lock Wireless Backup Camera Be Installed and Secured Inside the Hitch

Question

Question:

can the camera be put in the hitch in lieu of what appears to be a magnitic attachment to the tailgate or do you still have to attach to the tailgate? I would think this could easily be stolen. Also if I order and it is not want he wants can I return? Thanks

asked by: diane

0

Expert Reply:

Yes, the camera can be mounted inside the hitch and secured with a lock like part # e98880. I have included a link to a picture of the camera installed in a hitch and locked inside.

We do have a return policy and I have included a link to it below.

expert reply by: Patrick B

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 6

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

Hey Antoine, so the two kits you mentioned are actually really similar and honestly I would go with the part #ETBC7 if I were you. The #ETBC7L is basically the same thing minus a couple wires and breakers so you may as well get the kit that has…

view full answer...

Answer 9

Hey Lester, so the Curt Front Hitch #C31076 will be a fit for the 2022 Toyota 4RunnerTRD Off Road Premium. I can't speak on what Amazon says, but I doubt their product information is written by folks who actually know the products. I went ahead…

view full answer...

Answer 10

Yes, you can! So long as our Kenda Loadstar 5.30-12 Bias Trailer Tire with 12" White Wheel item #AM30820 is the same size and bolt pattern as what's on your Ironton trailer it can be used not only as a spare but also on your trailer with the…

view full answer...

Answer 11

Yes, your Champion 200961 will fit the TorkLift Lock and Load SideKick Cargo Tray #TLA7901. The inside dimensions of the tray are 21-1/4" long x 16-1/8" wide x 3-15/16" deep. The 200961 is 17.3" long x 12" wide so it…

view full answer...

Can Master Lock Wireless Backup Camera Be Installed and Secured Inside the Hitch

Products Referenced in This Question

Featured Help Information

Miscellaneous Media

Continue Researching