Side Steps for a 2014 GMC Sierra 1500

Question

Question:

How to install bully side steps part bbs- 11 01 on 2014 gmc sierra 1500

asked by: Shawn

0

Expert Reply:

I have a great solution for you but the Bully side steps # BBS-1103 do not fit the 2014 GMC Sierra 1500. They only fit up to 2011 models. But we have other options that do fit your Sierra. I have included a link to the most similar ones for you.

I recommend Carr steps # CARR103991. I have linked the installation instructions to the right for you.

expert reply by: Michael H

0

Answer 1

There is a spare tire carrier that will work for you, the CE Smith Offset Spare Tire Carrier #CE27310G. This carrier fits trailer frames that are up to 3-1/2" wide x 4" tall and holds 4 and 5 lug trailer wheels (4 on 4" as well as 5 on…

view full answer...

Answer 2

I think your best option would be to make a base for the DeeZee Specialty Series Trailer Tongue Toolbox #DZ91717P out of aluminum like you suggested and then attach the box to the base. This would provide you with a very secure attachment point for…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 8

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

Hey Doug, The inside dimensions of the Demco Channel Tongue Trailer Coupler #DM13689-95 are 3" tall x 3" wide x 5" long (pictured below). The sides of the coupler don't need to fully cover the frame tube height-wise. As long as you…

view full answer...

Answer 11

Hey Michael, I can help you get setup to tow with your 2024 Toyota Tundra. First you'll need a receiver; I recommend the etrailer Trailer Hitch Receiver 2" #e98905 since it has a matte finish which blends in and looks OEM. Then you can pair…

view full answer...

Answer 12

I'm assuming you have hydraulic drum brakes and actually need the brake actuator. If that is the case, you're looking at either extending the tongue so you can bolt on an actuator like the #DX33FR or welding one on like the #DEX94FR. Both…

view full answer...

Side Steps for a 2014 GMC Sierra 1500

Products Referenced in This Question

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching