Hitch Mounted Spare Tire Carrier Recommendation with Low Angle

Question

Question:

The angle of the mount is to severe.Can you take the angle off the mount.

asked by: Ken

0

Expert Reply:

I have a better solution for you. Check out the Draw Tite Hitch Mounted Spare Tire Carrier part # 6715. This carrier has a less severe angle that should work well for you.

expert reply by: Jameson C

0

Answer 1

The Curt Trailer Hitch Mounted Spare Tire Carrier #C31006 referenced in your question is a universal spare tire carrier and will work with your 10 bolt wheel. When mounting the wheel onto the carrier, you will just need to line up two of the bottom…

view full answer...

Answer 2

The etrailer Hitch Mounted Spare Tire Carrier - 2" Hitch item #e98ZR will hold your 37”x12.5”x17” spare provided that the trailer hitch on your vehicle is also capable of supporting the combined weight of the spare and the carrier. You will want…

view full answer...

Answer 3

As long as can install a hitch at the rear of your motorhome the Curt Spare Tire Carrier part #C31006 that you referenced would work very well for you. I attached a review video for you to check out as well. Now, the weight capacity on this spare…

view full answer...

Answer 4

Yes, the Curt spare tire carrier part #C31006 will work great with your dual axle 6 lug wheel. I attached a picture that shows it carrying a dually axle wheel like what you mentioned.

view full answer...

Answer 5

I did some calculations and came up with a 6.78 inch tall sidewall on your tire that combined with the 9 inch Radius of your wheel would give you 15.78 inches above and below the center of the wheel mount location on the Curt Hitch Mounted Spare Tire…

view full answer...

Answer 6

The diameter of your tire size 245/70R19.5 is going to require a tire cover size of 32 - 34-1/4 inches. If the cover is for wheels mounted on the trailer we have the gray covers part #CA80085. Or if it's a spare cover we have the #052963753875.

view full answer...

Answer 7

I do have an option for you but most hitch mounted spare tire carriers like the etrailer Hitch Mounted Spare Tire Carrier part #e98ZR aren't rated for motorhome wheels/tires. The main issue is that the mounting system won't accommodate wheels…

view full answer...

Answer 8

The Curt Trailer Hitch Mounted Spare Tire Carrier #C31006 referenced in your question will work nicely with your 19.5, 10 lug tire and wheel. When mounting the wheel you will just want to line up two of the bottom holes and one on the top, securing…

view full answer...

Answer 9

Yes the hitch mounted spare carrier part #6715 can fit the hitch you have at the rear of your Minnie Winnie.

view full answer...

Answer 10

I do have a solution for you however the Stromberg Carlson Folding Bumper Mounted Tire Carrier #TR-2 will not work with dually wheels. In order to mount your 75 pound Class C tire, I recommend looking into a hitch-mounted carrier like the Curt…

view full answer...

Answer 11

You can use the Draw Tite Rear Mounted Spare Carrier #6715 at the rear of a motorhome. We've had several customers who have done this report back to us that it worked out just fine and there's no reason there'd be any issue.

view full answer...

Answer 12

When a tire is attached to the universal spare tire carrier, #6715, the tire will be at a slight angle; maybe 10 degrees off from a straight up and down 90 degrees. The top of the tire will be slightly closer to the vehicle than the bottom like in…

view full answer...

Hitch Mounted Spare Tire Carrier Recommendation with Low Angle

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching