Dimensions of the Mounting Bracket 4-Pole Flat # 18144

Question

Question:

What are the dimensions of the bracket?

asked by: Chris

0

Expert Reply:

I pulled a Tow Ready 4-Way Mounting Bracket part # 18144 from our warehouse to measure it and found that it measures 1-3/4 inches in height, 2-1/4 inches in width, and 1-1/4 inches in depth.

expert reply by: Jameson C

0

Answer 1

I recommend the Tekonsha T-One Vehicle Wiring Harness, #118727 for your 2021 Jeep Grand Cherokee. This custom-fit T-One connector simply plugs into your vehicle's OEM wiring harness that is located behind the tail lights. Then run a hot lead up…

view full answer...

Answer 2

I recommend taking a look at your wiring harness to determine what brand of harness is installed on your vehicle. If the wiring harness on your vehicle is manufactured by Draw-Tite, Hidden Hitch, Reese, Tow Ready or Valley, the Tow Ready Mounting…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 6

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 11

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Dimensions of the Mounting Bracket 4-Pole Flat # 18144

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching