Can a 2007 Chrysler Town and Country Tow a 2,850 lb Popup Camper
Question:
Can I pull a 12 ft box pop up camper weight is 2850 with a Chrysler Town and Country2007 on a class 2 hitch?
asked by: Stacy
Expert Reply:
A Class II trailer hitch would have enough towing capacity to pull your pop up camper, but we will want to make sure your 2007 Chrysler Town and Country is capable of towing that weight. According to the owners manual, your Town and Country would only have enough towing capacity to pull your camper if it came with a factory tow package. If it did not come with a tow package, the maximum towing capacity is 1,800 lbs.
To determine if your van came with the tow package, I recommend contacting your local Chrysler dealership with your VIN. The tow package may not necessarily consist of a trailer hitch and trailer wiring, so contacting a dealer is the best way to determine how your van is equipped.
If your Town and Country has the factory tow package and you just need to add a trailer hitch and wiring harness, I recommend going with a Class III trailer hitch over a Class II. If you have Stow-N-Go seating, I recommend the Draw-Tite Trailer Hitch, # 75305. If you do not have Stow-N-Go seating, then you can use part # 75119. I have attached installation videos for both of these trailer hitches for you to check out.
For a ball mount, it is important to choose a ball mount with the correct rise or drop to tow your trailer level. If you can tell me the coupler height of your trailer (the distance from the ground to the bottom of the coupler) when the trailer is level and the hitch ball size required by the coupler, I would be happy to recommend a ball mount and hitch ball setup for you.
Finally, you will just need a wiring harness. Chrysler does not recommend splicing a harness into your vehicles tail light wiring, so I recommend using a plug-in style harness like the Tow Ready T-One Harness, # 118300. I have also attached an installation video for this.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 350 lbs TW
- 3500 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 500 lbs WD TW
- Visible Cross Tube
- Draw-Tite
more information >
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 350 lbs TW
- 3500 lbs GTW
- 4000 lbs WD GTW
- 2 Inch Hitch
- 400 lbs WD TW
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Brake Controller
- Video: Autowbrake Electric Brake Controller Review
- Shop: Curt Echo Wireless Brake Controller - 7-Way Plug Mount w/ Bluetooth App - 1 to 2 Axle - Proportional
- Q&A: Installation Instructions For The JR Products RV Cabinet Door Struts # 37270545
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Difference Between Square and Round Tube Trailer Hitches for 2010 Honda CR-V
- Q&A: ETBC7 Installation Recommendation for a 2005 Chrysler Town and Country
- Article: Trailer Hitch Receiver Sizes
- Q&A: Is Bumper Removed On Install Of Draw-Tite Trailer Hitch, # 75305, On 2007 Chrysler Town And Country
- Q&A: How To Find Lock Code for Keys To Camper
- Article: 2023 Best Gifts for Outdoor Enthusiasts
- Article: 2023 Best Gifts for Auto Enthusiasts
- Article: How to Choose the Right Trailer Hitch Class
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch
- Q&A: All Parts Needed to Tow With a 2007 Dodge Grand Caravan
- Article: My Trailer Hitch Doesn't Fit
- Q&A: Trailer Towing Capacity of 2005 Chrysler Town & Country Touring Edition