What is the Inlet and Outlet Diameter of MagnaFlow Spun Stainless Catalytic Converter Part MF54956

Question

Question:

whats the in/out size of this cat?

asked by: john

0

Expert Reply:

The inlet and outlet diameter is 2-1/2 inches. This Catalytic Converter is 49-state approved. It is not approved in California.

expert reply by: Patrick B

0

Answer 1

For your 1997 Ford F-250 HD, I recommend installing the Timbren Rear Suspension Enhancement Springs, #TFR150SDE, for a 2 wheel drive, and #TFR250SDE, for a 4 wheel drive. These springs will fit models with or without factory top overload springs…

view full answer...

Answer 2

Yes, the MagnaFlow Stainless Steel Catalytic Converter - Universal, item #MF59959, can be installed in either direction. If a catalytic converter must be installed in a particular direction there will be markings on the outside of the converter…

view full answer...

Answer 3

Unless you'd be interested in going to a different suspension enhancement setup we won't have a solution since all of the gooseneck hitches we offer mount on the outside of the frame rails where your current air bag brackets are. The…

view full answer...

Answer 4

For a truck your age they didn't make the air bag kits to be compatible with gooseneck hitch rail kits. The rail kits will interfere with the brackets of the air bag kits. That's why you would need the Timbren kit part #TFR250SDE…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Hi there David; we do have truck camper jacks that can work for your F-250 with a lift and large tires. What you can use are camper jacks from Brophy, which have a 17" to 67" lift range, which is the highest possible lift height. There are…

view full answer...