Can a European 7-Way Trailer Connector be Converted to a U.S. 4-Way
Question:
Im in the Army over in Germany. I brought my classic 1970 Cadillac Deville over here and plan on taking it to local car shows. The only problem of course is that I need to convert or should I say use a different wiring system in order to do so. I havent the slightest idea on how to do this. When I ask the German Mechanics they simply tell me that they cant do it. Please tell me that there is obviously a way to do this. It would look much better and also add to the American pride if I roll up to the Old Timer car shows pulling my Classic Cadillac with a nice Escalade EXT. My name is Angelo. Email: Dmodest1@Yahoo.com
asked by: Angelo D
Expert Reply:
You have 2 options. First you can convert the Escalade wiring harness, after installed, to match the trailer. Or you can convert the trailer connector to match the vehicle connector, once it is installed.
The easiest thing to do would be to convert the trailer but there may be certain lights and functions required in Europe that are not required in the U.S. I will try to cover both ways for you but there is no simple adapter for either method.
To convert the vehicle, first you will need to install trailer wiring # 18252. This is a hardwire harness so you will need to test the vehicle wires to determine function and then attach the wires to the harness as follows:
white = ground (earth), attach to bare metal surface on vehicle frame
brown = running lights
yellow = left turn signal and brake lights
green = right turn signal and brake lights
To separate out the signals you will need a converter, # 118158. Cut off the 4-Way end on the # 18252 harness. Then connect green to green, yellow to yellow, and white to white. The brown wire will bypass the converter.
Then you will need to obtain a vehicle side European 7-Way locally and attach the wires as needed. I think on a Euro 7-Way there is also a fog light function. You can just attach the running light circuit to it as well as the running lights.
The other option is to leave the wiring harness on the vehicle and put a 4-Way flat on the trailer. You would need to cut off the Euro 7-Way and in its place use # HM48110 or similar trailer side 4-Way. The functions are white is ground, brown is running lights, yellow is left turn and brake lights, and green is right turn and brake lights. You will need to attach the wires to the existing trailer wiring so you have at least the basic lighting functions. Some functions will be lost.
Products Referenced in This Question
Vehicle to Vehicle Tail Light Converter
- Accessories and Parts
- Trailer Wiring
- Mounting Hardware
- Brackets
- 7 Round
- 7 Round
- Tow Ready
more information >
4-Way Flat Trailer Connector w/ 72" Harness, Circuit Tester and Wire Taps
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- 6 Feet Long
- Universal Fit
- 4 Flat
- Tekonsha
more information >
Hopkins Endurance 4-Way Flat Trailer Connector - Trailer End - Ergonomic Design
- Trailer Wiring
- Trailer Connectors
- Trailer End Connector
- 0 - 5 Feet Long
- Plug and Lead
- 4 Flat
- Hopkins
more information >
Product Page this Question was Asked From
Adapter 7-Pole Round Pins To 4-Pole Flat
- Trailer Wiring
- Wiring Adapters
- Single-Function Adapter
- 7 Round - Round
- Plug Only
- 4 Flat
- Hopkins
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: 2 Inch Bike Rack On 1 1/4 Inch Hitch On 2001 Volvo V70
- Q&A: 7-Way Round Pin to 7-Way Flat Blade Adapter W/Compatible Brake Controller To Control Trailer Brakes
- Q&A: Availability of 2 Inch Receiver for 2004 Volvo XC70
- Shop: Hitch Adapter 2" to 1-1/4" Trailer Hitch Receiver - 7" Long
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Shop: Trailer Hitch Receiver Adapter 1-1/4" to 2" Hitch - 6-1/2" Long
- Q&A: How to Adapt a 7-Way Round Connector to a 7-Way Flat
- Shop: Pollak Black Plastic, 7-Pole, RV-Style Trailer Connector - Trailer End
- Shop: Curt Powered Tail Light Converter w/ 4-Way Flat Trailer Connector and Install Kit
- Shop: Pollak Heavy-Duty, 7-Pole, Round Pin, Trailer Wiring Connector - Trailer End
- Q&A: Can a European 7-Way Trailer Connector be Converted to a U.S. 4-Way
- Shop: Trailer Hitch Adapter - 1-1/4" to 2" Hitch - 4-1/2" Drop/5" Rise - 6-1/2" L
- Q&A: Wiring a U.S. 7 Pin to European 7 Pin
- Q&A: Changing from European 7 Way Plug to US 5 Way Plug on Land Rover D90
- Shop: Trailer Wiring
- Shop: Trailer Hitch
- Shop: Brake Controller
- Search Results: 11 4 to 2 hitch adapter
- Video: Curt Trailer Hitch Installation - 2015 Volvo V60
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: 44649
- Video: Choosing the Right Trailer Wiring
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: 68149
- Video: Choosing the Right Brake Controller
- Video: etrailer Class III Trailer Hitch Installation - 2016 Jeep Cherokee
- Search Results: 25580
- Shop: Fifth Wheel Hitch
- Search Results: dust cap
on Trailer Wiring
