Availability of Complete Trailer Suspension Rebuild Kit
Question:
Good Morning, I have a 1995 tandem Trail-Rite boat trailer, which needs work. A buddy has advised that I should be looking at replacing both axels 71inch to spring center, spring as well the breaks. I need to use electric over hydraulic due to trailer weight and boat. Wondering if you have a package kit which you are able to quote. I am looking at the following items, but know I will need more: T484600 I have a integrated trailer brake controlled in my 2010 GMC Sierra; T4843700 breaking kit not opposed to drum sets, however did not see a complete kit. Will need the axels, springs and shackles as well. And of course need lights on it, but I think I will be blowing my budget with the above first. Not sure if I have provided you all the information or not. If not please advise and I will try to get you the info. Thanks.
asked by: Kyle
Expert Reply:
We do not offer a complete kit with all of the components you will need but you can certainly select the components to allow you to rebuild your trailer's suspension. We always suggest that all the components in the suspension system be changed out at the same time.
I have linked you to our main page for trailer axles; you can use the filters at the left-hand side of the page to narrow the products down to what you need. I provided also links to our pages for suspension components (where you can select hangers, equalizers, springs, etc) and for brakes. Again, you can use the filters to find the exact parts you need.
You might take a look at the linked articles as a starting point.
Product Page this Question was Asked From
Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 72" Long - 2,200 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 2200 lbs
- Spindles Only
- 58 Inch Long
- 72 Inch Long
- No Drop or Lift
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Easy Grease Trailer Idler Hub for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Trailer Idler Hub for 2,000-lb and 2,200-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Shop: Dexter Trailer Axle Beam with Standard Spindles - 72" Long - 2,000 lbs
- Shop: Dexter Trailer Idler Axle w/ Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 72" Long - 2,200 lbs
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5-1/2 - Pre-Greased
- Shop: Replacement Race for L44643 and L44649 Bearings
- Shop: Base Plate for Tow Bar
- Search Results: 20545i~ez~72~10
- Q&A: Do Hubs Come Pre-Installed on Dexter 2,200 Pound Trailer Axles
- Video: Dexter Trailer Idler Axle w/ EZ Lube Hubs Installation
- Q&A: Recommended Replacement 2,200-Lb Trailer Axle
- Q&A: Can Hubs from Old Axle Be Used With Dexter # T20BTR-EZ-7258 Replacement Trailer Axle
- Q&A: What Info Is Needed to Pick Out 2,200 lb Trailer Axle for 2000 Viking 2107 ST Pop Up Camper
- Q&A: Recommended 2200 lb Hubs For 12 Inch Wheels
- Q&A: Information Needed to Find Replacement Axle for Airstream Travel Trailer
- Search Results: 25580
- Shop: Trailer Hitch
- Article: Most Popular Wheel Bearings
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: leaf spring
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Search Results: equalizer
- Shop: Vehicle Tow Bar Wiring
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: l44649
- Shop: Vehicle Tow Bar Brake System
- Video: Timbren Axle-Less Trailer Suspension System Installation