Availability of Grease Caps for Long Chih Trailer

Question

Question:

grease caps for Long chih trailer. vin.169279 year 7-1996 gawr 1180

asked by: Glenn L

1

Helpful Expert Reply:

In order to find a replacement grease cap, I'll need the the outer bearing reference number or the diameter of the hub bore. The measurement of the hub bore needs to be a very precise, so an accurate measuring tool like a digital caliper should be used. A ruler or tape measure wouldn't provide enough accuracy.

With this information, I should be able to find a replacement grease cap for you.

expert reply by: Mike L

1

click to enlarge

Answer 1

I was unable to find a cross-reference to the bearing number 30205 you referenced. I will need some more information from you to be able to determine what seals and bearings will work for your trailer. I have included a drawing that shows where the…

view full answer...

Answer 2

The bearing number alone is not the best indicator for a specific grease or oil seal. Trailers with the same bearing number could have different seals based on the spindle or hub that is being used. Bearing number 30205 is not a bearing that we offer…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 7

A BT8 spindle would have a diameter of .99 of an inch where the bearings would both install and would have a diameter of 1.24 where the great seal would ride. That would require a hub part #AKIHUB-440-2-1K for an idler hub. A BTR spindle would have…

view full answer...

Answer 8

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 9

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 12

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

view full answer...

Availability of Grease Caps for Long Chih Trailer

Product Page this Question was Asked From

Continue Researching