Can I Start And Run An Ac Unit With A 2,200W AC Pure Sine Wave Inverter

Question

Question:

Suggestions on best if any rv air conditioners sold by etrailer that could startup and function using a Bluetti 200Max having a 2,200W AC Pure Sine Wave Inverter 4,800W Surge. Heating and cooling an uninsulated five window schoolie? Thanks for your support

asked by: David W

0

Expert Reply:

Hello David. A 2,200W inverter would allow you to run an AC unit but you would not be able to start one. For example the Advent 13,500 BTU AC # ASA56YR requires 3,000 watts for starting and 1,000 watts while running. We do not offer anything that will start on 2,200W.

expert reply by: Jesse M

0

Answer 1

Hey Jason, I spoke with Furrion and they stated that the Furrion Chill Cube is OEM only currently and should be released to the aftermarket distributors later on this year (2024), but there is no solid date. That says to me that they're…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

You can convert surge brakes to an electric over hydraulic braking system. To do this, you will need an electric over hydraulic actuator and a brake controller. For an electric over hydraulic actuator, I recommend looking at the Carlisle HydraStar…

view full answer...

Answer 4

First you will need to remove the old hydraulic equipment. Remove the surge coupler or actuator, remove all the lines, and finally remove the brake assemblies. If you have 10 inch diameter hub and drums, you may need to replace those as well. If you…

view full answer...

Answer 5

Trailer stabilizer jacks like #TJSCHD-24 are not designed to be used to lift a trailer and hold it up for maintenance. Their purpose is to stabilize the trailer while it's parked and no more. What you're looking for is a jack to hold the…

view full answer...

Answer 6

Hey Robert, thanks for reaching out! You are correct that you'll want to install the rear Hellwig Anti-Sway Bar #HE78RR first on your '22 Entegra Odyssey 26D, and then if you still need more help you can install the front Hellwig Anti-Sway…

view full answer...

Answer 7

The Hydrastar #HS381-8067 is a vented version of the actuator designed for marine applications (boat trailers) whereas the part #HBA16 was not designed for marine applications.

view full answer...

Answer 8

The Timbren Axle Less Kit part #ASR2KHDS03 that you referenced is essentially a 2,000 lb axle so it would take two of them for a 4,000 lb trailer. If you have a 4,000 lb trailer axle the most similar option that would work well you'd want the…

view full answer...

Answer 9

Yes, the puck system used on the 2016-2019 Chevy/GMC trucks is different than the pucks used on the 2020 and newer trucks. So you would need a 5th wheel like the B&W Companion #BWRVK3710 for your 2020 GMC Sierra 3500 with an 8' Bed. If you…

view full answer...

Answer 10

For your 2019 Chevy Silverado 3500, the manufacturer puck system is not available in aftermarket but there is a very similar option to give you the 4 pucks. It is the Reese Under-Bed Rail and Installation Kit for Reese Elite Series 5th Wheel Trailer…

view full answer...

Answer 11

I reached out to Roadmaster about the Comfort Ride Leaf Spring Suspension Kit w/ Shocks #RM-2460-2580 you are looking to install. While they are unable to give exact numbers for the length of travel on the leaf springs the shocks do have 5-1/2"…

view full answer...

Can I Start And Run An Ac Unit With A 2,200W AC Pure Sine Wave Inverter

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching