Recommended Top Wind A-Frame Trailer Jack
Question:
How is this mounted to an A-frame trailer tonguecoupler? I imagine there would need to be a separate weld-on three hole bracket part for this jack like the ones factory installed on most A-frame jacks. Do you sell such a weld-on three mounting hole bracket part? If you do, what is its part number?
asked by: Steve
Expert Reply:
The mounting bracket we sell for the Bulldog Round Jack, part # BD150000, you mentioned is not the weld on style triangular bracket you asked about. It is the Mount Tube for Bulldog Round Jack, part # BDPG9810-00. This attaches to the outer tube of the jack and has a round mount with a pin to secure it into place. I may have another option for you.
I recommend the Pro Series Round A-Frame Jack, part # PS1400600303. This jack has a 5,000 lb lift capacity and has the triangular plate already welded to the jack tube. It can be welded to the trailer frame or bolted into place. This jack has a lift of 15 inches.
If you are interested in a detachable caster for the jack I recommend part # PS1400750340. Using a caster does lower the capacity of the jack. If you need a detachable footplate for the jack I recommend part # PS1400700340.
I have attached a link to a product review video you may find helpful.
Products Referenced in This Question
Pro Series Detachable Footplate w/ Pin for 2" Diameter Jacks - 2,000 lbs to 5,000 lbs
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Jack Foot
- 2 Inch Diameter Tubing
- Pro Series
more information >
Pro Series 6", Detachable Caster w/ Pin for 2" Diameter Jacks - 1,200 lbs
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Jack Wheel
- 6 Inch Wheel
- Wheel w Caster Assembly
- 2 Inch Diameter Tubing
- Pro Series
more information >
Product Page this Question was Asked From
Bulldog Round Jack - No Mount - Topwind - 10" Lift - 2,000 lbs
- Trailer Jack
- Car Hauler
- Enclosed Trailer
- Utility Trailer
- Leveling Jacks
- Tongue Jacks
- Steel
- 1001 - 2000 lbs
- Topwind Jack
- 10 Inch Lift
- Not Mounted
- No Wheel or Foot
- Bulldog
more information >
Continue Researching
- Article: 2023 Holiday Must Haves
- Q&A: Sway Control Options for a Straight Tongue Trailer
- Q&A: Trailer Jack that Doesnt Hang Down Very Far for a Big Tex Utility Trailer
- Q&A: Replacement Trailer Jack for Viking Legend Pop-Up Camper
- Q&A: Loose Fulton Magnum Series Swivel Trailer Jack on 2002 Ranger Boat Trailer
- Q&A: Replacing Fulton Trailer Jack on 2004 Boat Trailer
- Q&A: Replacement Jack for Bulldog BD154107
- Q&A: Can Bias Ply Trailer Tires Be Used On Long Trips
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Determining Trailer Tongue Weight
- Article: Best Hitches for Travel Trailers (2022) - For a Smooth, Sway-Free Ride