Will Reese Elite Series Pop-In Gooseneck Ball Kit Fit a Ram 3500 AHU Gooseneck Towing Prep Group

Question

Question:

will this work for a ram 3500 with AHU gooseneck towing prep goup?

asked by: Jeanne C

0

Expert Reply:

If your Ram 3500 has the factory installed gooseneck/5th wheel prep package then you can use the Reese Elite Series ball kit # RP30137. It will not fit any other brand of gooseneck trailer hitch.

expert reply by: Michael H

0

Answer 1

Yes, the B&W #BWGNXA2061 is compatible with the OEM puck system in your 2022 Ford F-350.

view full answer...

Answer 2

The Reese Elite Series Pop-In Ball Kit, #RP30137, will only fit in a Reese Elite Series underbed gooseneck trailer hitch installation kit. If you do not have this kit in your truck, this ball is not going to fit. If you do have this kit, no other…

view full answer...

Answer 3

If your 2016 Ram 2500 with the Ram Box has coil springs, I recommend the B&W #BWGNRK1384 gooseneck hitch for your 6 foot bed with Ram Boxes on the side. This gooseneck hitch will have a 7,500 TW and a 30,000lb GTW. There will be no drilling…

view full answer...

Answer 4

For your 2015 Ford F-350 short bed we can offer gooseneck hitch options whether or not you have the factory rail kit in the truck bed. If you do NOT have the rail kit you can use the Draw-Tite #8339-4449 which has an in-bed ball release. If you…

view full answer...

Answer 5

The Reese Elite Series Pop-In Gooseneck Ball Kit #RP30137 will fit your 2016 Ford F-350 Super Duty that has a factory-installed gooseneck hitch. This kit includes the 2-5/16-inch hitch ball, two safety chain hookups and a rubber cover for the ball…

view full answer...

Answer 6

Because the 5th wheel trailer hitch will be centered over the rear axle or slightly in front of it on a short or long bed truck, the result will be the same. One will not squat more than the other. So what you have said about the prep package for…

view full answer...

Answer 7

On the top of the Reese Elite Series Pop-In Ball Kit #RP30137 will be a black, spring loaded integrated lever to unlock and lock the ball to allow it to be removed or installed. Basically, you would pull the lever up and the locking mechanism in…

view full answer...

Answer 8

The Gooseneck Hitch Ball Kit I recommend for your 2021 Ford F-350 Super Duty with Factory Puck System is the B&W Ball and Safety Chain Kit for Ford, GM, and Nissan Titan Underbed Gooseneck Trailer Hitch #BWGNXA2061. I recommend the…

view full answer...

Answer 9

The safety chain loops on your 2017 Ford F-350 with the factory puck system should be installed in the pucks closest to the tail gate. So if you were installing the Reese Elite Series Pop-In Ball Kit for Ford Super Duty #RP30137, which fits your…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 12

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from…

view full answer...