Recommended 1" D-Ring Adapters for a 2024 Ford Bronco

Question

Question:

Im trying to find out if the Blue Ox 1 adapters BX88358 fit the D Ring Mounts on a 2024 Ford Bronco with the HD Modular bumper. I currently have the 7/8 D Ring Adapters that I used for my Jeep Wrangler but these do not fit about 1/16 too narrow.

asked by: Ken S

0

Expert Reply:

Ken, the difference between the 7/8" adapters you have and the Blue Ox Off-Road Bumper Adapters for Blue Ox Motorhome Mounted Tow Bars # BX88358 is a 1/8", which is a sixteenth of an inch larger than what you need and should give you the room you're looking for.

expert reply by: Bryce D

0

Answer 1

No, I am sorry they do not. Blue Ox only makes a baseplate item #BLU23XR that requires the removal of the recovery shackles and D-rings. Their Off-Road Bumper Adapters item #BX88358 will not work. However, Curt does make a set that will work. It is…

view full answer...

Answer 2

For off-road bumpers Blue Ox has two D-ring size adapters available. They have the #BX88358 which is for 1 inch d-rings and they offer the #BX88357 which is for 7/8 inch d-rings. They do not offer a 1-1/8 inch adapter.

view full answer...

Answer 3

I believe you're referring to the modular bumper on the 2021 Ford Bronco. From what I can find the D-Rings are only meant for recovery purposes and aren't currently listed as being rated to tow from. This could be outdated information though…

view full answer...

Answer 4

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 5

Ken, the difference between the 7/8" adapters you have and the Blue Ox Off-Road Bumper Adapters for Blue Ox Motorhome Mounted Tow Bars #BX88358 is a 1/8", which is a sixteenth of an inch larger than what you need and should give you the…

view full answer...

Answer 6

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 7

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 8

If you are installing just the Firestone Ride-Rite kit, #F2400, and not also adding an on-board air compressor such as #F2158, then I would estimate that it should take about 2 hours to install the kit. That is for someone with some mechanical…

view full answer...

Answer 9

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 10

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 11

Whether or not you can flat tow with a Jeep bumper is really up to the manufacturers testing; some of the big names like MetalCloak or Poison Spyder have bumpers with D-ring attachments that can be used for flat towing connections. This is great…

view full answer...

Answer 12

The installation instructions for this product are recommended for individuals who have experience winding torsion springs. If you have not worked with a torsion spring system before, we recommend contacting a local garage door company to install…

view full answer...

Recommended 1" D-Ring Adapters for a 2024 Ford Bronco

Product Page this Question was Asked From

Continue Researching