Front Hitch for 2022 Mercedes Sprinter for Carrying E-Bike Rack

Question

Question:

Hello I have a 2022 Mercedes sprinter crew van I want to put a front hitch on for my e-bikes will the bike rack interfere with the front bumper sensor do you know?

asked by: Tracy

0

Expert Reply:

Hey Tracy, so we have the EcoHitch front hitch part # 306-X7352 that is a fit for your 2022 Mercedes Sprinter and would work well with an e-bike rack like the part # TH903202 but I would anticipate it would interfere with front sensors just because of how large the bike and rack is.

expert reply by: Jameson C

0

Answer 1

Attaching the EcoHitch Hidden Front Hitch item #306-X7352 not your 2022 Sprinter 3500 will not affect the warranty. This hitch is custom fit and bolts to your Mercedes with included hardware. This front mounted hitch has a 3,500 lbs capacity for…

view full answer...

Answer 2

I checked with both Draw-Tite and Curt and sadly the only option for putting a front mounted hitch on your 2019 Mercedes 2500 Sprinter is to use the EcoHitch item #306-X7352. Front mounted hitches for the Sprinter vans are extremely limited and I…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 6

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 7

Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and…

view full answer...

Answer 8

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 9

I do have an option for you, but we do not carry the Dexter 072-027-00 you mentioned. However we do have the etrailer Double-Eye Spring for 7,000-lb Trailer Axles - 24-7/8" Long #e64SR which will be 3/8" shorter but that is still close…

view full answer...

Answer 10

The B and W Companion hitch part #BWRVK3370 that you referenced does not come assembled. The head will come in one box, and the slider setup will be separated out into two more boxes. I attached a link to the install instructions for you to check out…

view full answer...

Answer 11

Yes, you can install a Curt Trailer Hitch Receiver #C11433 on your 2019 Chevrolet Spark. This receiver is capable of supporting up to 200lbs of tongue weight. With each of the Lectric 3.0 e-bikes weighing roughly 60lbs without the battery you will…

view full answer...

Answer 12

The Voyager monitor part #VOM719WP will work great as a replacement monitor for what you have now with the AOM-7694.

view full answer...

Front Hitch for 2022 Mercedes Sprinter for Carrying E-Bike Rack

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching