Solution for Needing Replacement Disc Brake Componentts for Venture Boat Trailer # VATB-5225
Question:
HI, I have a Venture double axle aluminum boat trailer, model VATB-5225. I pulled the rear axle wheels off, and the rotors are very corroded and the outer pads almost gone. Also one side the inner seal had failed. Thinking about replacing the rotors, pads and hubs, but Im not seeing matches. The current rotors are Sturdy Built 26381, have 5 on 4.5 bolt pattern and measure 11 in diameter. The Calipers are Sturdy Built 225 not stainless. - What would be the correct rotors either coated galv or other or stainless? For the 11 OD I do not see a 5 x 4.5 hub. - What are the right brake pads? - And the hubs 5 x 4.5 fit on an axle with 1.72ID inside bearing and 1.062ID outside bearing. Is there a galv or stainless with packed bearings? A lot of questions, thanks.
asked by: Ken M
Expert Reply:
Hey Ken, so what you have on your trailer is a 3,500 lb axle which we can help with but since the calipers you have are a brand we don't carry you would need to go with an all new kit since nothing we have would let you reuse them since the alignment would be wrong.
So you could go with the DeeMaxx Disc Brake Assembly Kit part # DE89YR for all of the spindles and you'd have everything you needed to get the parts you need and your trailer going again.
Product Page this Question was Asked From
DeeMaxx Single Disc Brake Assembly - 10" Hub/Rotor - 5 on 4-1/2 - Maxx Coating - 3,500 lbs
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 5 on 4-1/2 Inch
- Hub and Rotor
- 1/2 Inch Studs
- 3500 lbs Axle
- DeeMaxx
more information >
Continue Researching
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Shop: Kodiak Trailer Hub for 3,500-lb Axles - 5 on 4-1/2 - Stainless Steel
- Shop: Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Search Results: bearing buddy 1980
- Shop: Kodiak 10" Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: Kodiak 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Search Results: ce13515
- Shop: DeeMaxx Stainless Steel Drive-In Grease Cap w/ Plug - 2.45" Outer Diameter
- Search Results: khr10d
- Shop: Trailer Hitch
- Search Results: 44649
- Article: Trailer Wiring Diagrams
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Q&A: Replacement 5 Leaf Slipper Spring for a Tandem Axle Dump Trailer with Two 6K Axles
- Search Results: 25580
- Article: Most Popular Wheel Bearings
- Shop: Trailer Wiring
- Article: Trailer Tire Sizing
- Search Results: 68149
- Video: etrailer Trailer Idler Hub Assembly Installation
- Q&A: Recommended Lithium Battery Compatible Power Converter For Parallax 7355
- Shop: Gooseneck Hitch
- Search Results: dust cap
- Shop: Brake Controller
- Q&A: Seal With Dimensions to Replace 171255UC
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: How to Choose the Right Trailer Hitch Class
on Trailer Brakes
