How to Identify Trailer Axle Brand on 2019 Salem FSX Series 179DBK
Question:
Do you know what brand of axle is on a 2019 Salem fsx179dbk. It is a single axle trailer.. thanks
asked by: Mark G
Expert Reply:
We do not have a way to identify the axle on your 2019 Salem FSX 179DBK. What you will need to do is climb under the trailer and look for the axle tag. If the axle tag is too worn or missing there may be a serial number stamped into it which could identify the axle. If you can't find either of those the only way to identify the axle would be to pull the VIN and call Salem to see what they put on the trailer.
If you were trying to decide if the Bearing Buddy Bearing Protectors # BB1980A you were looking at would fit all you need to do is measure the hub bore. These are designed to fit a 1.980" hub bore so if that is your measurement these will work for you.
Product Page this Question was Asked From
Bearing Buddy Bearing Protectors - Model 1980A w/ Auto Check - Chrome Plated (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.98 Inch
- Bearing Buddy
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Hub, Bearings, and Grease Seal for 3,500 lb Dexter Axle
- Q&A: Issue with Bearing Buddy Leaking Grease from Overfill Port
- Article: Trailer Tire Sizing
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Replacement Bearings, Seals, Hubs For 2021 Riverside Retro 135 With 3,500 lb Axle
- Q&A: USA Made Bearing Kit For An AL-KO 4,400 lb Axle
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Trailer Wiring Diagrams
- Q&A: How Does Inner Bearing Get Grease When using Bearing Buddy
- Q&A: Difference Between Bearing Buddy 1980 Models
- Q&A: Is There a 5-Lug Idler Hub for Trailer with Two L44649 Bearings
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Measure a Trailer Axle