Replacement Hub for a Pontoon Boat Trailer
Question:
Im trying to determine if this is the correct part number for the hub assembly I need. the bearings are so worn I cant get the number off of them. below is the info I have. - 5 bolts on 4-1/2 BC - 6-1/2 diameter hub - Bearing ID 1.063 - Seal OD 2-9/16 - dust cap OD 1.987 Random numbers on hub casting 051903 HA12 07
asked by: Rob S
Expert Reply:
I am almost certain that the bearings you have, if both the same, are # L44649 bearings with a 1.063 inner diameter. What I really need to know at this point is the inner diameter of the seal, not the outer. Using a set of digital or dial calipers will provide and accurate measurement. You can also measure the spindle with the calipers. I will need the measurements shown in the picture I have included.
Products Referenced in This Question
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- L44643
- L44643
- For 2000 lbs Axles
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Q&A: Replacement Hub for a UFP H-1377 on a 2004 Tahoe Boat Trailer
- Video: etrailer Trailer Idler Hub Assembly Installation
- Q&A: Replacement Hub for Tracker TrailStar Boat Trailer
- Search Results: #84 spindle
- Shop: Replacement Race for L44643 and L44649 Bearings
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5-1/2 - Pre-Greased
- Shop: CE Smith V-Wing Bolster Bracket for Pontoon Boat Trailers - Galvanized Steel - Qty 1
- Shop: MORryde StepAbove RV Steps for 23-3/4" to 26-1/4" Wide Doorways - 2 Steps
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Search Results: mortadella
- Shop: Trailer Idler Hub Assembly for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Q&A: How to Determine Compatible Replacement Trailer Hubs
- Video: MORryde StepAbove RV Steps Review MR26RR
- Search Results: trailer axles
- Q&A: Difference Between 205/65-10 and 20.5 x 8-10 Trailer Tire Sizes
- Q&A: Lug Nut Torque for Kenda 205/65-10 Bias Trailer with 10" White Wheel # AM3H430
- Q&A: Replacement 5 Leaf Slipper Spring for a Tandem Axle Dump Trailer with Two 6K Axles
- Search Results: 44649
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Article: Most Popular Wheel Bearings
- Search Results: 25580
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Shop: Brake Controller
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Search Results: 68149
- Shop: Gooseneck Hitch