Anti-Rattle Hitch Pin Compatible With Curt Hitch Extender # C76DR

Question

Question:

is there an anti-rattle pin for this item - I have bought and used, but it really move around a lot - - if not, can you suggest a different extender that does have anti-rattle technology. : Thanks!

asked by: Matt

0

Expert Reply:

Yes, we have either the Anti-Rattle Pin # C69HR or Locking Anti-Rattle Pin # 63232 which you can use with the Curt Hitch Extender # C76DR.

expert reply by: Bud M

0

Answer 1

The Curt hitch extender part #C76DR is a 6 inch extender but it has a 3,500 lb weight capacity that won&#39;t work with a 5,000 lb capacity but I do have a solution with an extra long ball mount like the part #80232 which is 15-3/4 inch…

view full answer...

Answer 2

You are correct that the Subaru OEM hitch will sit higher than the Curt #C13409. The OEM hitch will be much more flush with the bumper, while the Curt hitch will sit about 2&quot;-2.5&quot; lower, leaving space between the bumper and…

view full answer...

Answer 3

The second pin hole of the Curt ball mount part #C45240 that you referenced is 3 inches behind the first one. That means the second pin hole is 6-1/4 inches from the weld bracket.

view full answer...

Answer 4

There are actually 2 Draw-Tite trailer hitches for the 2018 Subaru Outback: Class III #75673 with a 2 inch receiver opening and Class II #36493 with a 1-1/4 inch receiver opening. If you have the Class III 2 inch trailer hitch I recommend Brophy…

view full answer...

Answer 5

The Kuat NV 2.0 #NV22B measures 55-1/8 inches wide overall, folded or unfolded. The height when folded is 25-3/4 inches. When unfolded it is approximately 13 inches tall. When unfolded the rack is 37-3/8 inches front to back. When folded up it is…

view full answer...

Answer 6

We have just the thing! Most of the 2023 Bronco models will require use of a smart diode. It depends on what lighting system your Bronco has. If your vehicle has the variable voltage LED lighting you will want the #RO44FR. If it has incandescent…

view full answer...

Answer 7

Congrats on the new car! For your 2024 Subaru Outback, I recommend the etrailer Hitch item #e25TR. This hitch is custom fit and bolts to your Subaru with included hardware. I really like this hitch because it mounts behind the rear bumper cover…

view full answer...

Answer 8

The interior dimensions of the 23" x 51" UWS Cargo Carrier for 2" Hitches #UWS65XR is 20-1/2" x 48 1-/2". As far as a floor, there is not a traditional floor but there are strips of aluminum that line the…

view full answer...

Answer 9

The best way you can determine if your 2021 Ford F-150 has LED or Incandescent lights is to call the dealer with your VIN number and they should be able to tell you. If your vehicle has LED lights, you can use the Roadmaster Universal Wiring Kit…

view full answer...

Answer 10

In regards to the Adjustable Width Trailer Hitch Receiver for RVs part #13703, the brackets have a built-in offset so you can install them in a manor which pushes the crosstube further out towards the bumper. This will help reduce clearance issues…

view full answer...

Answer 11

Yes you can just swap out the bars on your Equal-i-zer Weight Distribution System w/ 4-Point Sway Control #EQ64FR with the Replacement Spring Bar for Equal-i-zer Weight Distribution Systems #EQ90-02-1499.

view full answer...

Anti-Rattle Hitch Pin Compatible With Curt Hitch Extender # C76DR

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching