Availability of InvisiBrake Installation Video on 1998 Jeep Wrangler

Question

Question:

Do you have any videos of installing the invisibrake system in a Jeep TJ? 98 Thanks

asked by: Carl B

0

Expert Reply:

The closest thing we have is the installation of the # RM-8700 on a 2014 Wrangler which I attached below. Although it isn't exactly the same you can use it as a general reference coupled with the written instructions.

expert reply by: Robin H

0

Answer 1

The correct Roadmaster Crossbar-Style Base Plate Kit for your 2001 Jeep Grand Cherokee is part #1419-7. The part #1425-1 that you referenced actually only fits a 2004 Jeep Grand Cherokee. Attached is a picture of the finished product that a customer…

view full answer...

Answer 2

The Pollak 6-Pole Round Pin Trailer Wiring Socket #PK11609 does have a small Philips type screw to hold the rear collar in place. You will need to remove this screw completely and pull/twist the collar to remove it for access to the pins for…

view full answer...

Answer 3

If you are asking which pin you will wire the 12V power source to on wiring like the Blue Ox 6-Wire, Coiled Electrical Cord with 6-Way, Round Plugs #BX8862 then yes, the 12V power will be wired to the center pin. The 12V power pin can be used to…

view full answer...

Answer 4

My contact at Blue Ox was able to confirm that in their Coiled Electrical Cord with 6-Way Round Plugs #BX8862 the wires gauges do vary. The ground wire is 12-gauge but all other circuit wiring is 16-gauge.

view full answer...

Answer 5

It appears you are connecting your tow vehicle wiring to a 6-way connection like the RoadMaster 6-Wire Flexo-Coil Kit #RM-146. Making these connections is not difficult and I've attached a video and photo as well as linked an article to assist…

view full answer...

Answer 6

If all you want is to prevent the 12 volt power supply of your trailer battery wiring from backfeeding onto your vehicle wiring or vice versa what you need is a one-way diode like part #RM-690. This only allows current to flow in one direction so…

view full answer...

Answer 7

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 10

Hey there Jeff, thanks for the question and I can definitely get you all the parts needed to flat tow your 2014 Chevy Silverado 1500 behind your motorhome. I'll go ahead and list everything out for you to make it easy to order. - Base Plate Kit:…

view full answer...

Answer 11

The closest thing we have is the installation of the #RM-8700 on a 2014 Wrangler which I attached below. Although it isn't exactly the same you can use it as a general reference coupled with the written instructions.

view full answer...

Answer 12

The first thing you'll need to flat tow your 2015 Chevy Malibu LS is a base plate kit like the Roadmaster part #RM-523178-5 that is a confirmed fit. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting,…

view full answer...

Availability of InvisiBrake Installation Video on 1998 Jeep Wrangler

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching