Replacement Bearing Kit For Dexter 6,000 lb Axle 2266389

Question

Question:

Replacement Bearing Kit for 2017 Forest River Cedar Creek Silverback. Dexter axel # 2266389 -6000 lbs rating.

asked by: David E

0

Dexter Axle Tag
(click to enlarge)

Expert Reply:

Hey David, thanks for the picture. I was able to track down a spec sheet for your Dexter axle which I have included below. The 031-029-02 bearing is item # 15123 and the 031-030-02 bearing is item # 25580. For a bearing kit you can use part # BK3-110 which will come with both bearings, races, grease seal, spindle washer and cotter pin.

expert reply by: Jesse M

0

Dexter Axle 2266389 Specs
(click to enlarge)

Dave E.

3/18/2024

Jesse Received my correct 2.25 seals and proceeded with my project. Unfortunately the outer bearing and race are to big? Couldn’t get a part number off the bearing put have attached a photo of the race. Any ideas?

Reply

Jesse M.

3/18/2024

@DaveE That is very interesting since Dexters parts catalogue confirms that the 031-029-02 is the 15123 bearing. I saw your email with the pictures of the LM67010 race which contradicts the information on the axle spec sheet. Perhaps the hubs were replaced with aftermarket at some point and the replacement hubs use this different bearing? That or the specs that Dexter sent were wrong. Either way, you are going to need the # LM67010 race and the # LM67048 bearing to match. The # LM67048 bearing has the same 1.25" ID as the 15123 so it will fit the same spindle. I do appreciate your patience thru all of this. We are nearly there!

Reply

Dave E.

3/6/2024

Jesse, Thanks for all your help! I have ordered the parts and moving forward with my project. The Dexter Axel spec sheet comes up fuzzy in the email is there a way for me to find this on my own? Thanks again

Reply

Jesse M.

3/7/2024

@DaveE Oh I see. Sorry about that. I will go ahead and email you the spec sheet.

Reply

Answer 1

Your 2020 Forest River Cedar Creek 5th Wheel will use the 010-036-00 Grease Seals #RG06-070. Your Dexter axle has a 2.25" inside diameter grease seal. The 010-010-00 Oil Seal #RG06-090 only has an inner diameter of 2.125" We do offer the…

view full answer...

Answer 2

Your 6K Dexter axle uses spindles that are compatible with a 25580 inner/ 14125A outer bearing and a 10-36 grease seal. We offer a replacement bearing kit as part #BK3-200 that includes the inner and outer bearings and races, the grease seal and a…

view full answer...

Answer 3

Yes, the bearing kit part #BK3-210 does fit a good portion of the 7,000 lb Dexter axles out there, but some of the 7k Dexter axles require a slightly larger grease seal which instead requires the kit part #BK3-200. What you'll want to do is…

view full answer...

Answer 4

I was able to cross reference the Dexter part number 031-17-02 to a #14125A bearing and part 031-030-02 to a #25580 bearing, and we do have these replacement parts with a grease seal in a complete kit for you. For a replacement bearing/race/seal kit,…

view full answer...

Answer 5

You can use the other components you remove from your hubs. After you have removed the hub components you will want to inspect all of the parts and replace if you find any discoloration or signs of wear or damage such as a nick. On the race you can…

view full answer...

Answer 6

Thanks for the axle information, Mike! Here are the correct parts according to my contact at Curt: - Bearing #02475 and Race #02420 - Bearing #25580 and Race #25520 - Grease Seals #RG06-070

view full answer...

Answer 7

The correct bearing kit for your 7,000 pound Lippert axle is #BK3-210.

view full answer...

Answer 8

I was unable to identify your exact axle but I found Trailer Hub and Drum Assembly #AKHD-865-7-2-EZ-K to work if you have EZ Lube axles. If you do not have EZ Lube axles use Trailer Hub and Drum Assembly #AKHD-865-7-2-K. Both of these kits will come…

view full answer...

Answer 9

I didn't receive a picture which you can email to me directly if you would like. However, since you have a Dexter D60 axle you will need the Bearing Kit, 14125A/ 25580 Bearings, 10-36 Seal item #BK3-200 you were looking at.

view full answer...

Answer 10

The Lippert Motor Home Entry Screen Door Bubble Slider Panel - Frosted #LC234101 measures to your required size at 12 x 12-inches. This part is clear, and it can be trimmed is necessary.

view full answer...

Answer 11

Hey David, thanks for the picture. I was able to track down a spec sheet for your Dexter axle which I have included below. The 031-029-02 bearing is item #15123 and the 031-030-02 bearing is item #25580. For a bearing kit you can use part #BK3-110…

view full answer...

Replacement Bearing Kit For Dexter 6,000 lb Axle 2266389

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching