Availability of Kodiak 10 inch Disc Brake Kit that Comes with Brake Lines

Question

Question:

looking for kodiak disc brake 10 in. hub\rotor. complete kit, with hoses, and everything

asked by: Gerald A

0

Expert Reply:

Hey Gerald, so we have the Kodiak disc brake kit part # KOD67FR which comes with the 10 inch hub/rotors, calipers, and brake mounting flanges as well as the bearings and seal but we don't have this kit with the brake lines. So you would need to get the brake line kit separately like the part # 18SI-BLKIT for a single axle setup or the part # 20TA-BLKIT for a tandem axle setup.

expert reply by: Jameson C

0

Answer 1

While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the 1.6" ID and 2.5" OD measurements you provides, that is very close to our #58846. This particular grease…

view full answer...

Answer 2

The AL-KO trailer hub part number 8700 that you have is a 3,500 lb trailer hub/drum with a 5 on 4-1/2 inch bolt pattern. Based on that the #AKHD-545-35-EZ-K is the correct fit and would work great.

view full answer...

Answer 3

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 4

We have a really great kit that comes with everything you'd need to convert your 2021 Vanleigh Pinecrest 335RLP from tandem 6k drum brakes to electric over hydraulic disc brakes with the HydraStar Disc Brake Kit w/ Actuator for Triple Axle…

view full answer...

Answer 5

Going to electric over hydraulic is probably a bit of overkill, and disc brakes will serve you very well, but without the locking up. So that's the route I recommend, and since you have a 5 on 4-1/2" bolt pattern it is likely you have a…

view full answer...

Answer 6

Sorry for confusion but Kodiak Disc Brake Kit part #K2R35S does come with stainless steel pads and not the ceramic red pads that are seen in some pictures.

view full answer...

Answer 7

The surge brake equipment of your trailer consists of the brake lines, drum brakes and the brake actuator. To ensure I recommend the correct parts for your trailer I will need a little more information. A brake line kit is pretty universal. For a…

view full answer...

Answer 8

Thanks for the information and photo, Kenneth! It looks like your trailer is equipped with 3,500 lb axles so to replace your bearings and seals you need the kit #BK2-100, but it also looks like you have an older disc brake kit with a design that…

view full answer...

Answer 9

The DeeMaxx item #DE86VR won't because of the spacing on the mounting bracket but I have a caliper that will. To replace your Tie Down Engineering 46304 caliper you will need the Kodiak Disc Brake Caliper item #KDBC225DAC.

view full answer...

Answer 10

For a valve stem to use with the trailer wheel part #AM20232 you would want the part #AM20906 which has inserts to fit all standard trailer wheels and also can handle up to 200 psi so it will be very reliable.

view full answer...

Answer 11

I can certainty provide you with the information you need to select these parts yourself but as far as giving you a list of parts, that's not going to happen unfortunately as there are no resources available to look this stuff up. That said, to…

view full answer...

Availability of Kodiak 10 inch Disc Brake Kit that Comes with Brake Lines

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching