What Is The Global Link Locking Baggage Lock GL34FR Made Of

Question

Question:

Is this made of plastic or metal? I am looking to replace the 3 latches I have on my Jayco Melbourne 24l. I would like to go with the metal ones from global but the door is less than an inch thick and I believe they need to be at least 1-1/2”.

asked by: Eric M

0

Expert Reply:

Hey Eric sorry for the delayed response. As far as the Global Link Locking Baggage Lock Actuator Set with Mounting Plate # GL34FR, the handle and face plate are made of plastic. The mounting plate is made of steel. This latch will work on doors 0.7" to 1.25" thick.

expert reply by: Jesse M

0

Answer 1

We may have some potential options for replacing the tack room door lock on your Featherlight trailer. Is the 5" L x 5" H dimension you gave for the door cutout or the lock itself? The best way to find the right replacement lock is…

view full answer...

Answer 2

I contacted Trimark in regards to a replacement part for the Trimark 030-0900. 030-0900 is actually a series number not a specific part number. To find the part number you will need to take the interior handle completely off the unit. On the back…

view full answer...

Answer 3

The Lippert Lippert Slam Latch for RV Doors #LC54PJ has a bit of a unique design since it tapers inward as you get closer to the plunger, so you wouldn't want to swap it out with anything else unless you were ok with making modifications to the…

view full answer...

Answer 4

Hey Cory! Yes, the Global Link RV Baggage Door Slam Latch #295-000015 will fit with a 1-1/4" thick door. If you don't have a mounting plate then you'll also need the part #295-000016 to complete the installation.

view full answer...

Answer 5

While we currently do not have the Nova style of slam latches we do offer a more generic looking style with the Global Link RV Baggage Door Slam Latch with Keyed Alike Option #295-000015 along with the backing plate #295-000016. This slam latch…

view full answer...

Answer 6

Hi Jimmy, The Global Link Locking Baggage Lock Actuator Set with Mounting Plate #GL34FR you referenced requires a cutout hole measuring approximately 3.75" x 3.75" and a door thickness of 0.7" to 1.25" thick. You can unscrew the…

view full answer...

Answer 7

Generally speaking, the hub face measurements will be around 15" longer than the spring center measurement. That said, this can vary based on multiple different factors such as tire size, offset, etc. The most common options we offer are the…

view full answer...

Answer 8

The Bauer Products RV Baggage Door Slam Latch #BA57FR will fit cut outs that measure 3-1/4" tall x 4" wide (which is a fairly standard measurement). If that is the size of your cut out then this slam latch will work for you. While the Bauer…

view full answer...

Answer 9

Although we do not have any that are designed for a door that thin you can still use the Global Link Locking Baggage Lock Actuator Set with Mounting Plate #GL34FR you were looking at. All you need to do is add a thin piece of wood to the inside of…

view full answer...

Answer 10

The Replacement Mounting Hardware part #LC701665 comes with the Extension Rods, Extension Rod Bracket, Torsion Arm Caps, and various hardware. I am not sure what all you have now but it sounds like you might also need the torsion heads, part #LC87FR…

view full answer...

What Is The Global Link Locking Baggage Lock GL34FR Made Of

Product Page this Question was Asked From

Continue Researching