2016 Ford F-150 Rhino-Rack Vortex Roof Rack Half Kit

Question

Question:

Hi I currently have 1 rhino rack vortex aero clamp on style on my 2016 Screw f150. Im looking to add a second one. Can you direct me to the correct part numbers. Thanks

asked by: Matthew T

0

Expert Reply:

Thanks for reaching out, Matthew!

To get just half of the Rhino-Rack Vortex roof rack for your 2016 Ford F-150 you need the following parts:

- 59" Vortex Aero Crossbar # RRVA150B
- 2500 Series Legs # RRRLKVAH
- Fit Kit # DK427H

All of these are just half kits so you won't have extra parts when all is said and done.

expert reply by: Jon G

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 3

Hey Mark, so the correct Blue Ox base plate kit to use with the Blue Ox Ascent tow bar part #BX4375. is the part #BLU53FR. For lighting you can use #C96JR, and not have to worry about cutting into the taillight housing as this plugs inline with the…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

You came to the right place Mark we do indeed sell those parts individually. I have listed them below: Rhino-Rack Vortex Aero Crossbar - Aluminum - Black - 59" Long - Qty 1 item #RRVA150B Custom DK Fit Kit for 2 Rhino-Rack 2500 Series Roof Rack…

view full answer...

Answer 6

The Thule Rapid Traverse Roof-Rack Foot Pack #TH480R comes with a tool that's basically a torque wrench which lets you know exactly how tight to get the hardware. Basically you tighten the tool till the line on the green portion of the tool lines…

view full answer...

Answer 7

The 71" Rhino-Rack Vortex Crossbars for Retrax XR Tonneau Covers item #RRVA180B-RRRLT600 are the correct set for your 2022 Ram 3500. These are made for full size trucks and fit in the rails of the Retrax PRO XR. These crossbars are exactly…

view full answer...

Answer 8

Thank you for the photos! It looks like if you flip the Rhino-Rack J-Style Kayak Carrier #S512 so the J-Cradles are hanging out over the Prinsu rack you should be able to move the clamping mechanism further out to the side for better clearance.…

view full answer...

Answer 9

Yes. The Rhino-Rack 2 Kayak Carrier J-Style - Folding #S512 will fit your factory crossbars, but you will need to check with the manufacturer for the full capacity of your roof rack and then subtract the carrier weight of about 15 lbs and make sure…

view full answer...

Answer 10

I would be happy to confirm compatibility with your 2017 Ram 3500 Tradesman Crew Cab. To attach the roof rack you will need the Custom DK Fit Kit for 2 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof item #DK043. These are the padded, metal clamps…

view full answer...

Answer 11

Yes they will so long as your 2020 Ford F-250 has a 6-3/4' bed. The RetraxPRO XR Hard Tonneau Cover item #RTT-80383 is for the shorter bed length. If you have an 8' bed you will want item #RTT-80384. The legs for the Rhino-Rack Vortex…

view full answer...

2016 Ford F-150 Rhino-Rack Vortex Roof Rack Half Kit

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching