Recommended Replacement Rail Clamps for the PaceEdwards JackRabbit

Question

Question:

will these fit Pace Edwards Jack Rabbit tonneau and if not, do you carry those clamps? Thanks

asked by: Michael B

0

Expert Reply:

The Replacement Rail Clamps for Pace Edwards Bedlocker Retractable Hard Tonneau Cover # PE84UV you're looking at are meant to replace the clamps on the Pace Edwards Bedlocker Retractable Hard Tonneau Cover # 311-BLC0303 so it won't work for the JackRabbit.

We do have the Replacement Rail Clamps for Pace Edwards Retractable Hard Tonneau Cover # PE54CV which will work with the JackRabbit, but they are going to be cover specific so I'd need to know what vehicle you have to confirm.

expert reply by: Bryce D

0

Answer 1

The replacement rail clamps #PE54CV for your Pace Edwards JackRabbit Retractable Hard Tonneau Cover #PE54UV on your 2010 Ford F-250, is not available separately from the kit. This kit does will work with the: -Bedlocker, -Bedlocker with Explorer…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Hey Roy, The only U-bolt kit we currently only offer for 1-1/2" square axles is part #CE23102, which only has a 3-3/8" length so it likely wouldn't be the best option for you. Instead you'll want to order the 1-1/2" Square…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 6

The Hydraulic Line Kit #9579-01 comes with two 18" flex hoses and two 51" steel lines.

view full answer...

Answer 7

If you are considering Timbrens like the #TDR1500DQ and the SumoSprings like the #SSR-307-47 for your 2022 Ram 1500 4x4, I recommend the SumoSprings #SSR-307-47. The SumoSprings will offer the same quality as the Timbrens in terms of suspension…

view full answer...

Answer 8

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...

Recommended Replacement Rail Clamps for the PaceEdwards JackRabbit

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching