Can Grommets Be Used With A Hopkins EasyLift Tailgate Lift Assist # 74211

Question

Question:

I am asking in reference to the Hoskins Easy Lift 74211. Can grommets be used in the drilled holes so it isn’t metal on metal and help prevent rust and hopefully decrease resistance?

asked by: Bobby L

0

Expert Reply:

Yes, you could definitely use some rubber grommets along with the Hopkins EasyLift Truck Bed Tailgate Lift Assist # 74211 to help prevent rust and corrosion or metal on metal.

expert reply by: Kevin C

0

Answer 1

The Hopkins EasyLift Truck Bed Tailgate Lift Assist #74211 is more of a universal fit item so it would likely fit your 2005 Toyota Tundra. We've had numerous reviews from people with 2005 and 2006 Toyota Tundra's all stating…

view full answer...

Answer 2

For a 2003 Toyota Tundra you will need the Pop and Lock Custom Power Tailgate Lock, part #PAL8500. This lock will work with your factory power lock system, so it will lock and unlock using your remote key system. It will work with the factory…

view full answer...

Answer 3

Yes, I spoke with Pop and Lock and the #PAL8500 which fits your 2003 Toyota Tundra fits the tailgate whether it came with a factory manual lock or not.

view full answer...

Answer 4

Hey Deanna, the brake controller I recommend for your 2005 Toyota Tundra is the Redarc Tow Pro Liberty part #RED24FR as it only puts a small knob on the dash of your truck and uses an inertia sensor to determine how hard you are hitting the brakes…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

I do have an option for you but the Stromberg Carlson 4000 Series 5th Wheel Louvered Tailgate part #VGD-10-4000 does not have a spot for the factory backup camera. Therefore you would either need to find a way to mount this yourself, go without, or…

view full answer...

Answer 8

On your 2005 Toyota Tundra the factory plug to plug in a brake controller is located underneath the dash, to the left of the steering column, taped to another harness near the emergency brake pedal. However, it is possible that it is up above the…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

The factory towable bumper on a 2002 Toyota Tundra is one that has about a 1" diameter hole drilled in the center of the bumper for a hitch ball. I have attached a photo of a Tundra with and without a factory towable bumper for you to help…

view full answer...

Answer 11

The Replacement Tailgate Top Seal for Pace Edwards Retractable Tonneau Covers #PE99CV does not come with great instructions. In order to install the Replacement Tailgate Top Seal for Pace Edwards Retractable Tonneau Covers #PE99CV, you will need to…

view full answer...

Can Grommets Be Used With A Hopkins EasyLift Tailgate Lift Assist # 74211

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching