Does the Draw-Tite Hitch DT79MR Fit a 2024 Honda CR-V Hybrid?

Question

Question:

Does the Draw-Tite DT79MR fit a 2024 Honda CR-V Hybrid?

asked by: Gary B

0

Expert Reply:

Yes, it does! We have spoken to Draw-Tite about this and gotten multiple reviews back from customers who have installed the Draw-Tite Hitch item # DT79MR on their 2024 Honda CR-V Hybrid. This hitch is custom fit and bolts to your Honda with included hardware.

I have linked an installation video below to help you get it set up.

expert reply by: Jerred H

0

Answer 1

The Draw-Tite Max-Frame Trailer Hitch Receiver #76128 will not fit on your 2023 Honda CR-V Hybrid due to a underbody cover. This cover is only present on hybrid models and the cross tube of the Draw-Tite receiver will not fit with this cover. I…

view full answer...

Answer 2

Great question, Gene! The Draw-Tite Max-Frame Trailer Hitch Receiver #76128 won't fit your 2023 Honda CR-V Hybrid but you can use the Draw-Tite #DT79MR instead. I actually like the part #DT79MR over the one you referenced anyways because…

view full answer...

Answer 3

I did some research and unfortunately the Draw-Tite hitch off your 2015 Honda CR-V will not fit your 2020 Honda CR-V due to Honda's changes to the rear and it's new bolt pattern. However, the Draw-Tite MaxFrame #76128 will fit all Honda CR-V…

view full answer...

Answer 4

We do indeed have a trailer hitch receiver that fits your 2024 Honda CR-V Hybrid Sport Touring with the following: - Curt Trailer Hitch Receiver #C13397 I have added a link below showing the install of the #C13397 on this exact vehicle for you.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 10

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 11

Yes, the Curt hitch part #C77ZV is a fit for the 2023 Toyota Crown Hybrid. I attached a link to the install instructions as well as a link to an installer finder in case you wanted to find someone near you to install the hitch.

view full answer...

Answer 12

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Does the Draw-Tite Hitch DT79MR Fit a 2024 Honda CR-V Hybrid?

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching