Hitch Mounted Spare Carrier that Can Carry 8 Lug Wheel

Question

Question:

I have an 8 lug mounted spare tire and cant use a bumper mount to hold it. I am looking for a trailer hitch mounted carrier that can accommodate that tire. Any options there?

asked by: Jerry S

0

Expert Reply:

We have the etrailer spare carrier part # e98ZR which would work well for you. This works with wheels that have 8 lug bolt patterns and fits 2 inch hitches.

expert reply by: Jameson C

0

Answer 1

This carrier was intended for use on trailers so it would be very unlikely it would be on your motorhome.

view full answer...

Answer 2

So the Lippert RV Spare Tire Carrier #LC159041 is designed specifically to bolt onto trailer frames, meaning it won't fit the underside of your motorhome as there's no place for it to bolt on in a similar manner. It would be nice if it did,…

view full answer...

Answer 3

On the Roadmaster Hitch Mounted Spare Tire Carrier #RM-195225 the part that remains upright when the spare tire is tilted down measures 12-1/8 inches tall from the top of the receiver opening. If you measure from the top of your hitch receiver…

view full answer...

Answer 4

We have the perfect spare tire mounted carrier for your 1999 Winnebago Adventure RV! The etrailer Hitch Mounted Spare Tire Carrier #e98ZR will fit into a 2 inch by 2 inch trailer hitch receiver. It has a black powder coated steel that is durable and…

view full answer...

Answer 5

The 3-3/4" measurement is measuring to the triangle piece/gusset. This does have some slight variation depending on the weld. After measuring I found that the distance from the center of the closest hole to the base of the gusset is…

view full answer...

Answer 6

I do have an option for you to mount a spare tire on the tongue of the trailer using a combo of the Swagman Straddler Trailer-Mounted Bike Rack Carrier for A-Frame Trailers part #S80503 and etrailer Hitch Mounted Spare Tire Carrier part #e98ZR.…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Yes, the Roadmaster Spare Tire Carrier #RM-195125 can pivot to the left or right depending on what kind off clearance you have. We only show to the left in the video because there is a ladder on the right side, but if you check out the attached photo…

view full answer...

Answer 12

We don't carry a bumper mounted spare tire carrier capable of the weight of a Class C Motorhome spare tire, however, we do have a hitch mounted option. The Roadmaster Hitch Mounted Spare Tire Carrier w/ 2" Receiver Opening #RM-195225 is an…

view full answer...

Hitch Mounted Spare Carrier that Can Carry 8 Lug Wheel

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching