Availability of 3 inch Hitch Pintle Hook Setup

Question

Question:

Need 3 inch pintel hook hitch 8278222612

asked by: Bhmllc

0

Expert Reply:

For a 3 inch hitch pintle hook setup Bhmllc what you'll need is the Super Titan Forged Pintle Hook Plate part # RP38186 which fits the 3 inch hitch size and has plate that a bolt on hook setup can attach to like with the Curt # C48231. We don't have a way to get the part number you mentioned.

expert reply by: Jameson C

0

Answer 1

We do offer the replacement mounting bolts for the 60,000 lb Curt Pintle Hook #C48231. I checked with Curt and they are 5/8" diameter Grade 8 bolts, and the complete kit is the following: - Curt Bolt Kit #C48332 This kit is the required bolt…

view full answer...

Answer 2

The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #13018 uses M14 x 5.50 grade 8 bolts. There are replacement hardware kits available for the Curt #13018 by putting that part number into the field marked "Hitch Item…

view full answer...

Answer 3

I had the bolt holes on the Super Titan Forged Pintle Hook Plate for 3" Trailer Hitches #RP38186 measured, and they are actually 5/8". That being said, I suggest going with the Curt Pintle Hook #C48215 to attach to it. This does…

view full answer...

Answer 4

The Curt Pintle Hook #C48231 is indeed rated for 60K GTW and 12K vertical load. I confirmed these specs with Curt. Those are high weight ratings but keep in mind that the nature of a pintle hook, which has a large amount of flat steel surface area…

view full answer...

Answer 5

Most pintle hooks use a standard bolt pattern which is 3-3/8" horizontally center to center and 1-3/4" vertically center to center (see photo). Therefore, the Pintle Hook part #C48231 would be a direct fit and work well for you. It…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

I went to our warehouse and measured the Buyers Products 50 Ton Air Compensated Pintle Hook #337PH50 to get the height dimensions. The overall height of the pintle when open is 12" and when closed is 9-1/2". I also took a measurement for…

view full answer...

Availability of 3 inch Hitch Pintle Hook Setup

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching