Idler Hub Assembly and Bearing Buddy Bearing Protectors For 3,500LB Axle On Float-On Boat Trailer
Question:
I am looking to replace the trailer hubs on my float-on boat trailer. I am wondering what you have that would be comparable to what float-on sells. I need a 5 on 4.5 bolt pattern with a 3,500 pound axle. Also looking to add bearing buddies to the new hubs as well.
asked by: Michael
Helpful Expert Reply:
The Trailer Idler Hub Assembly # AKIHUB-545-35-G-K uses the same Inner # L68149 and Outer # L44649 bearings as the Float-On 3,500lb hub. These hubs are sold individually so you will need 2 for your single axle. Then you will be able to add the Bearing Buddy Bearing Protectors # BB1980A-SS so you can more easily grease your hubs.
Products Referenced in This Question
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.98 Inch
- Bearing Buddy
more information >
Continue Researching
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: BoatBuckle Heavy Duty Ratchet Transom Tie-Down Straps - 2" x 2' - 833 lbs - Qty 2
- Shop: BoatBuckle Heavy Duty Ratchet Transom Tie-Down Straps - 2" x 4' - 833 lbs - Qty 2
- Shop: Erickson Re-Tractable Ratchet Straps w/ Push Button Releases - 2" x 6' - 1,333 lbs - Qty 2
- Shop: BoatBuckle Kwik-Lok Transom Tie-Down Straps - 2" x 2' - 400 lbs - Qty 2
- Shop: BoatBuckle Pro Series Ratcheting Transom Tie-Down Straps - 1" x 3' - 400 lbs - Qty 2
- Shop: CE Smith Galvanized Steel Step for Trailer Fender - 15-1/4" Long x 3" Wide - Qty 1
- Search Results: 44649
- Article: Most Popular Wheel Bearings
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Video: TruRyde Bearing Kit for #84 Spindle Installation
- Article: Trailer Wiring Diagrams
- Search Results: 68149
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Video: Roadmaster Automatic Battery Disconnect Installation - 2020 GMC Sierra 1500
- Q&A: Recommended 16' Mesh Tarp for Dump Trailer
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Shop: Brake Controller
- Search Results: 25580
- Search Results: dust caps
- Shop: Fifth Wheel Hitch
- Video: etrailer Electric Trailer Brake Kit Installation
- Article: Trailer Tire Sizing
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Search Results: dust cap
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Gooseneck Hitch
- Q&A: Equalizer Replacement Options for Dexter 13-122 Equalizer
- Search Results: 14125a