Seat Covers for 2010 Tiffin Phaeton 42QBH

Question

Question:

I need 2 seat covers for 2010 Tiffin Phaeton 42QBH. Can you help?

asked by: Larry S

1

Helpful Expert Reply:

For your 2010 Tiffin Phaeton 42QBH we have the universal Classic Accessories RV Captain Seat Cover # CA80112. This fits captain-style seats 23-1/2" wide with backs up to 23-1/2" tall. We don't have dimensions on the seats in your motorhome so you will need to measure to make sure they will fit.

expert reply by: Robin H

1

Answer 1

For a similar style light to the glo brite you mentioned, I recommend using the Thinline LED Trailer Tail Light w/Reflector #STL69RRXB which has tail, turn and brake light functions. This light is 15" long and 1-5/8" wide; the…

view full answer...

Answer 2

Your brake controller wiring bundle on your 2022 Tiffin Allegro Bus SHOULD be actually behind the panel to the left of where your left foot would be when driving. I did some digging online and that's where it should be on your motorhome. I…

view full answer...

Answer 3

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

I have a solution that may work for you, but we do not currently have any 3" diameter submersible reverse lights. Have a look at the Optronics Backup Light #BU45CB which is a 4-1/4" diameter light that can be mounted to your trailer using…

view full answer...

Answer 7

Wheel bolt patterns are defined by two numbers: the first being the number of lug nuts and the second being the diameter of the circle the lug nuts are arranged in. So a 5 on 4-1/2 bolt pattern is 5 lugs arranged in a circle that is 4-1/2 inches in…

view full answer...

Answer 8

If you are referring to the Roadmaster Reflex Steering Stabilizer then the correct one for your 2019 Jayco Alante 26X is part #RM-RBK22-RSSA. If you are instead looking for a rear anti-sway bar we have this as well, the Roadmaster Rear Anti-Sway Bar…

view full answer...

Answer 9

The issue you are describing is actually not all that uncommon when working with a trailer side 6-Way connector. This is because there are two different ways that a 6-Way is typically wired and the specific difference has to do with the brake output…

view full answer...

Answer 10

We do have the correct replacement motor for your 2019 Fleetwood Bounder 36f, but the Replacement Motor for Kwikee 25 Series Electric RV Steps #LC369506 is not it. From you picture I can identify that you have the 676062 motor. We do carry the 676062…

view full answer...

Answer 11

We definitely have some parts you can use for your application but none of them come in an all-inclusive kit. For a 50A to 30A service I recommend the Mighty Cord #A10-3050FHVP. For a 50A to 15A service I recommend the Mighty Cord #A10-1550. Please…

view full answer...

Answer 12

Since you already have your Alpha tow bar with safety cables #BX7380, you'll need only base plates, a braking system, a wiring kit. I recommend the Curt base plates #C46JR, which are a great match to your Alpha tow bar. For lighting I suggest an…

view full answer...

Seat Covers for 2010 Tiffin Phaeton 42QBH

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching