Recommended Roof Rack for a 2024 Chevrolet Blazer w/ Flush Mounted Rails

Question

Question:

Do you have a set of crossbars that mount to the flush rails on a 2024 Chevrolet Blazer that do not stick out over the sides?

asked by: Greg S

0

Expert Reply:

Yes, we do! To add a flush mounted roof rack to the rails on your 2024 Chevrolet Blazer, I recommend the roof rack by Yakima which includes the following parts:

Yakima SkyLine FX Roof Rack for Fixed Mounting Points - Aero Crossbars - Black - Qty 2 item # Y38UV

Landing Pad 19 for Yakima SkyLine and Control Towers - Qty 4 item # Y00245

This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same Key System item # Y07204 to prevent theft.

expert reply by: Jerred H

0

Answer 1

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 2

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Yes, we do! To add a flush mounted roof rack to the rails on your 2024 Chevrolet Blazer, I recommend the roof rack by Yakima which includes the following parts: Yakima SkyLine FX Roof Rack for Fixed Mounting Points - Aero Crossbars - Black - Qty 2…

view full answer...

Answer 5

Thanks for all the details! We definitely have a way to get a cargo basket and an awning installed on your 2024 Toyota Highlander, although the aftermarket roof rack systems will use a clamping system with your door jambs instead of mounting via…

view full answer...

Answer 6

The Rhino-Rack Roof Rack for Factory Tracks #Y02-490B-NT is going to be your best bet for the tracks on the ARE topper for your 2012 Toyota Tacoma. The weight capacity is 220 lbs like you mentioned, but that's going to be the highest you'll…

view full answer...

Answer 7

Thanks for reaching out, Joe! I recommend using the Rhino-Rack Aero Bar Roof Rack for Camper Shells #Y02-480B which comes with 63" long tracks as well as 54" long crossbars which should give you a little bit of overhang on your canopy. Per…

view full answer...

Answer 8

If you are using the Rhino-Rack Aero Bar Crossbars like #RRVA137B they have a dimension of 54" long x 3-1/8" wide x 1-3/16" tall which works for Thule boxes that use the PowerClick quick-release clamps, including the Thule Vector…

view full answer...

Answer 9

Both the Rhino-Rack Vortex Aero and Thule WingBar roof rack systems have very nice features and would work well for your 2014 Hyundai Santa Fe. Both systems are designed to work on vehicles that have the flush mounted rail system. As far as the…

view full answer...

Answer 10

The best roof rack for a 2024 Toyota RAV4 with flush rails is the roof rack by Yakima which includes the following parts: Yakima SkyLine FX Roof Rack for Fixed Mounting Points - Aero Crossbars - Black - Qty 2 item #Y38UV Landing Pad 23 for Yakima…

view full answer...

Answer 11

If you were to use a Thule cargo box like the Motion XT #TH629806 then yes, this box is compatible with a Yakima round bar roof rack. Sometimes the mounting hardware that comes with roof accessories will require an adapter to fit different style of…

view full answer...

Recommended Roof Rack for a 2024 Chevrolet Blazer w/ Flush Mounted Rails

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching