Is Class IV Trailer Hitch Available for a 2023 Mercedes-Benz Sprinter 2500

Question

Question:

Do you offer a Class IV hitch for a 23 Mercedes Sprinter 2500 with the factory step bumper? Currently only see that you offer class IIIs form Curt and Draw Tie. Thank you

asked by: Tom M

0

Expert Reply:

There are only Class III hitches that will fit your 2023 Mercedes-Benz Sprinter 2500, and out of our selection I recommend the Curt:

- Curt Trailer Hitch Receiver # 13358

According to my research your Sprinter is only able to tow up to a 5,000 lb trailer so anything more than a Class III would be rated for well over that.

expert reply by: Jon G

0

Answer 1

Thanks for the pictures! The best hitch for your 2023 Mercedes-Benz Sprinter 2500 is the etrailer item #e82TR. This hitch is custom fit and bolts to your Mercedes with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 2

The Curt Trailer Hitch Receiver part #13358 is a great option for a 2019 Mercedes-Benz Sprinter 2500. It will work with the factory exhaust without interference. I have attached a photo that shows how the hitch mounts up with the exhaust. I have…

view full answer...

Answer 3

If your 2019 Mercedes-Benz Sprinter 2500 has a standard bumper without the step, the Draw-Tite #75549 is going to provide you with the most ground clearance at 15" from the bottom of the receiver tube to the ground. If your Sprinter has the…

view full answer...

Answer 4

We do have a trailer hitch fit for your 2016 Mercedes Benz Sprinter 2500 that has the factory step bumper. The Curt hitch part #13358 would be what you need. This fits either length wheelbase as well. In the picture I attached you can see the hitch…

view full answer...

Answer 5

I would be happy to help you find a hitch receiver for your 2021 Mercedes-Benz Sprinter 2500 van with a factory step. In order to haul a trailer you are going to need a wiring harness as well. The Curt item #13358 you were looking at is the best…

view full answer...

Answer 6

Fitting a trailer hitch to a former ambulance can be pretty difficult since the rear bumper area is different than a standard vehicle. That said, I attached an install video and install instructions link to the page down below for you to check out to…

view full answer...

Answer 7

The Curt hitch item #13358 is a confirmed fit for your 2016 Mercedes Benz Sprinter 2500 Model 170 with OEM bumper step. The spare tire can be reinstalled after installation and removed when needed without any issues related to the Curt hitch item…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

The Curt hitch part #13358 that you referenced fits the long and short wheelbase versions of your 2016 Mercedes Benz Sprinter 2500 with the factory step bumper. To determine if your spare carrier will fit past the bumper when this hitch is installed…

view full answer...

Answer 12

There is a trailer hitch receiver that fits your 2024 Mercedes-Benz Sprinter 2500, made by Curt. The correct part number is the following: - Curt Trailer Hitch Receiver #C13388

view full answer...

Is Class IV Trailer Hitch Available for a 2023 Mercedes-Benz Sprinter 2500

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching