How Does the Hopkins Wiring Kit and The Tekonsha T-One Harness Install Together

Question

Question:

I am still trying to clarify how the flat tow harness and an existing trailer tow harness on the drivers side tail light would hook up. Is this correct? One connector from each harness flat tow and trailer tow connect to the wire running to the tail light connector and the tail light itself. The remaining connectors from both harnesses connect to each other. I cant see any other way to do it. Thank you!

asked by: Phil O

0

Expert Reply:

Yes, you are correct. The Hopkins Custom Tail Light Wiring Kit for Towed Vehicles # HM56200 and the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118416 will just plug into one another.

expert reply by: Bryce D

0

Answer 1

No, the Hopkins Custom Tail Light Wiring Kit for Towed Vehicles #HM56200 and the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #118416 can be used together so you won't have to splice into any wiring.

view full answer...

Answer 2

The Hopkins towed vehicle trailer wiring kit part #HM56200 that you referenced is designed to install by plugging inline with the vehicle's taillight connectors. That shouldn't be a problem for a trailer lighting kit that installs the same…

view full answer...

Answer 3

Roadmaster has a great solution for this. So what you end up doing is wiring the outlet kit part #RM-9332 directly to the vehicle battery so that you can power the Blue Ox Patriot part #BLU37TR directly from the battery while it is disconnected from…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 7

Hey Robert, for your 2016 Jeep Wrangler using the Ready Brute Elite II tow bar you can use the Blue Ox Base Plate Kit #BX1126 with the Blue Ox Base Plate Adapter Brackets for Ready Brute Elite Tow Bars #BX88297. From here, to complete your flat…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

Hello John. The #C96JR tail light kit for the 2023 Jeep Gladiator will indeed work with a Brake Buddy brake System Such as part #HM39524. So, if you plan to use a portable brake system, that is definitely what I recommend, and you do not need to get…

view full answer...

Answer 11

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 12

Hey Dave, The Curt Custom Tail Light Wiring Kit for Towed Vehicles #C96JR would not be intertwined or interfere with the Blue Ox Patriot #BLU37TR. This wire harness is simply plugging into the motorhome and Gladiator tail lights to copy the light…

view full answer...