Recommended Trailer Hitch Receiver for 2024 Ford Bronco

Question

Question:

What hitch should I get for my 2024 Bronco?

asked by: Tina

0

Expert Reply:

For your 2024 Ford Bronco I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver # DT37GR. This is a Class III hitch with a 2" receiver and a simple, bolt-on installation. The receiver on this hitch also sticks out far enough to clear a spare tire on the back so you won't have to worry about clearance if you add an accessory like a bike rack. It has a max gross trailer weight of 4,500 lbs and comes with a limited lifetime warranty.

I have attached an installation video below for your reference.

expert reply by: Robin H

0

Answer 1

To get your 2023 Ford Bronco set up with a 7-way, there's just a couple parts you will need. One of them is a 4-way, just keep in mind the right one for your Bronco will depend on if you have LED taillights or not: - WITH LED Taillights:…

view full answer...

Answer 2

As you already have the Curt Trailer Hitch Receiver #C76WR for your 2022 Ford Bronco Badlands you will only need the wiring. The Tekonsha OEM Replacement Vehicle Wiring Harness #TK55VR is compatible with your Bronco having LED taillights. This will…

view full answer...

Answer 3

Yes, you can mount the bracket for the Hopkins #HM40975 on the #DT37GR. The Draw-Tite bracket measures 2-1/4" and the Hopkins is 2-3/8" center to center. Since the left hole on the Hopkins is elongated to allow for adjustment it won't…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the 1.6" ID and 2.5" OD measurements you provides, that is very close to our #58846. This particular grease…

view full answer...

Answer 8

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 9

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 10

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 11

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 12

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Recommended Trailer Hitch Receiver for 2024 Ford Bronco

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching