Recommended Trailer Hitch for a 2023 Lexus RX 350 F-Sport

Question

Question:

Does this towbar fit the Lexus 2023 RX350 F-Sport?

asked by: Bobby K

1

Helpful Expert Reply:

Yes, the Draw-Tite Trailer Hitch Receiver # DT73QR you're looking at will work with your 2024 Lexus RX 350 F-Sport. This hitch has a max weight capacity of 3,500 lbs, a max tongue weight capacity of 525 lbs, and will bolt right on using the included hardware.

expert reply by: Bryce D

1

Answer 1

For your 2024 Lexus RX 350 we have the Draw Tite hitch part #DT73QR that I would recommend highly. This hitch is mostly hidden as only the hitch opening hangs below the rear bumper and it has the best towing capacities.

view full answer...

Answer 2

The Curt Trailer Hitch Receiver #C29VV will definitely fit your 2024 Lexus RX 500h and you'll still have the kick sensor functionality. Just know that you'll have to kick to either side of the receiver instead of…

view full answer...

Answer 3

For your 2024 Lexus RX 350 we have the Draw Tite hitch part #DT73QR which is mostly hidden as only the lower hitch opening hangs below the rear bumper.

view full answer...

Answer 4

We haven't had the opportunity to install the Curt Trailer Hitch Receiver #C29VV on a 2023 Lexus RX 350 as of yet (December 2023), but I'm attaching a clip from the instructions for you to reference. This part of the instructions shows there…

view full answer...

Answer 5

That is great information and I appreciate you letting us know. I will say that we have not got our hands on a 2023 RX 350 model yet, so we have not been able to confirm if the hitch #DT73QR will be compatible with the lift gate sensor. In some…

view full answer...

Answer 6

We have a hitch for your 2023 Lexus RX 350h with the Curt part #C29VV but the Draw Tite you mentioned does not work. The Curt would still allow the rear kick sensor to open the rear tailgate but you would have to kick to either side of the hitch.

view full answer...

Answer 7

There is indeed both a trailer hitch receiver and 4-way wiring harness that fit your 2023 Lexus RX 350, with the correct parts being the following: - Curt Trailer Hitch Receiver #C29VV - Curt Powered Tail Light Converter #C59236 These both fit the…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 11

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 12

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Recommended Trailer Hitch for a 2023 Lexus RX 350 F-Sport

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching