Replacing Voyager Prewiring To Install A Furrion Vision S RV Camera System
Question:
I have a 2021 Work And Play and it has the Voyager system pre wired. Is there a way to mount a Furion since the plugs are different?
asked by: Kevin
Helpful Expert Reply:
The Voyage prewiring will have to be completely removed in order to mount a Furrion camera system # FOS43TASF. Once the cover plate is off and you get to the wiring you can cut it from the running light wiring and then splice in the connector that comes with the Furrion system and then pass it through the rubber gasket of the camera mount. You can then connect the plug from the camera to it and screw the camera mount to the wall of the trailer.
I've attached an installation video I made below to help you with the installation process.
Products Referenced in This Question
Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 4.3" Screen
- RV Camera System
- Backup Camera
- Observation Camera
- Built-In Microphone
- Touch Screen
- Anti-Glare
- Mirrored Image
- Night Vision
- Motion Detecting
- Waterproof
- Wireless Signal
- 120 Degrees
- Dashboard Mounting Bracket
- Suction Cup Mount
- Below Rear Clearance
- 4.3 Inch Display
- 1 Camera
- Furrion
more information >
Product Page this Question was Asked From
Voyager WiSight 2.0 Wireless Backup Camera System w Night Vision for Prewired RVs - 4.3" Screen
- RV Camera System
- Backup Camera
- Built-In Microphone
- Mirrored Image
- Night Vision
- Waterproof
- Wireless Signal
- 120 Degrees
- Suction Cup Mount
- Below Rear Clearance
- 4.3 Inch Display
- 1 Camera
- Voyager
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Voyager WiSight 2.0 Wireless Backup Camera System w Night Vision for Prewired RVs - 4.3" Screen
- Q&A: Powering the Voyager WiSight 2.0 Wireless Backup Camera System w/ Night Vision
- Video: Furrion Vision S Wireless RV Backup Camera Installation - 2022 Keystone Passport SL Travel Trailer
- Video: Review of Voyager RV Camera System - Prewired Backup Camera - ASA24YR
- Shop: Strait-Line Weight Distribution System w/ Sway Control - Trunnion Bar - 12,000 lbs GTW, 1,200 lbs TW
- Shop: Reese Pro Round Bar Weight Distribution w Sway Control - Round Bar - 11,500 lbs GTW, 1,150 lbs TW
- Search Results: sway control only
- Q&A: Recommended Voayger Camera System for a Pre-Wired 2022 Coachman Freedom Express
- Q&A: Correct Backup Camera System for a Coachmen Apex Ultra Lite
- Q&A: Installing a Voyager WiSight 2.0 Camera in Prewired 2019 Lance 855 Truck Camper
- Q&A: Does Voyager WiSight RV Observation Camera System Have Gridlines
- Q&A: Best Observation System Recommendation to Use on 2019 Keystone Hideout with Voyager Pre Wiring
- Q&A: Replacement Camera For The Voyager WiSight 2.0 Wireless RV Backup Camera System
- Shop: Replacement Trunnion Spring Bar for Reese Weight Distribution System - 800 lbs TW
- Shop: Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion - 15,000 lbs GTW, 1,500 lbs TW
- Shop: Voyager WiSight 2.0 Wireless Backup Camera System w/ Night Vision for Prewired RVs - 7" Screen
- Shop: Reese Dual Cam High-Performance Sway Control for Steel Trailer Frames
- Search Results: rp26002
- Video: Furrion Vision S Wireless RV Backup Camera Installation - 2021 Grand Design Transcend Xplor Travel T
- Article: 5 Things to Know About Weight Distribution Hitches
- Video: Reese Weight Distribution - WD With Sway Control - RP66084 Review
- Video: Review of Reese Weight Distribution - WD Only - RE44FR
- Video: Reese Strait-Line Weight Distribution System Review RP66082
- Shop: Trailer Hitch
- Video: Voyager WiSight Wireless Backup Camera System Installation - 2018 Coachmen Apex Travel Trailer
- Search Results: furrion
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: backup camera systems
- Search Results: weight distribution hitch
