2003 Ranger 205 Winch Replacement Recommendation

Question

Question:

Need replacement winch for 2003 Ranger 205

asked by: Robert B

0

Expert Reply:

I really like the Dutton-Lainson Covered Hand Winch # DL17048 for your 2003 Ranger 205 boat because it's covered to it looks more sleek, and it has a 1,900 lb weight rating which means it can easily handle the weight of your trailer even if you have carpeted bunks. This also has a freewheel mode so you can effortlessly pull the strap out when hooking up to your boat.

expert reply by: Jon G

0

Answer 1

Any given tire size will fit a range of wheel widths. For a 175/80-13 trailer tire it will fit a 13 inch wheel that is 4-1/2, 5, or 5-1/2 inches wide. Wheel #AM20222DX is a 13 x 4-1/2 inch wheel so a 175/80-13 tire will fit on it. This wheel has a…

view full answer...

Answer 2

If you are set on a G2 style transom strap the BoatBuckle Mini G2 Retractable, Ratcheting Transom Tie-Downs #IMF106877 will be 6' in length. These are the only straps over 43" that BoatBuckle has in a transom strap. Each strap has a…

view full answer...

Answer 3

When looking at it from the front the winch will have an overall width of approximately 6-3/4", which does not include the extension from the handle. It has a height of right at 8" without the handle and from front to back it…

view full answer...

Answer 4

Assuming your tires are in good shape without any bulges the easiest way to determine if you have a bent spindle is to take a straight edge that is longer than the tire and lay it across the tire parallel with your trailer frame and then measure the…

view full answer...

Answer 5

My contact at Fulton confirmed that the A60 series is now obsolete and they don't make replacement parts. For a replacement, I recomemend the Titan Zinc-Plated Brake Actuator - Drum - Multi-Fit Ball - Bolt On - 7K #T43397007K. This surge brake…

view full answer...

Answer 6

The Fulton A60 Surge Brake Actuator is obsolete so you'll need to replace the entre unit for which I recommend using the Demco Hydraulic Brake Actuator part #DM72VR for drum or part #DM62VR for disc. The Demco actuator has a 7,000 lb rating which…

view full answer...

Answer 7

Yes, you do need a bolt-on to replace your A-60 actuator, and the swing-away won't be a factor since you are not using it. So long as you have a 3" x 5" straight tongue and drum brakes the correct replacement for an A-60 actuator is the…

view full answer...

2003 Ranger 205 Winch Replacement Recommendation

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching