Where Are 25-1/4" Long 5-Leaf Double-Eye Spring for 6,000-lb Trailer Axles Made

Question

Question:

Are these leaf springs made in the USA or China ?

asked by: Mike W

0

Expert Reply:

The 25-1/4" Long 5-Leaf Double-Eye Spring for 6,000-lb Trailer Axles # e78SR are made in China, which is pretty standard for most leaf springs on the market today.

expert reply by: Jon G

0

Answer 1

As long as your existing equalizers feature a bolt hole spacing that matches the equalizers for the Dexter E-Z Flex Rubber Suspension System #K71-652-00 the axle spacing isn't really a concern. Based on the measurements you provided of your…

view full answer...

Answer 2

With your axle leaf springs measuring out to 25-1/4 inches long I recommend the 4-Leaf Double-Eye Spring #e28SR for your 3,500 pound axle. This spring has a 5,000 pound weight capacity so it will be a little stiffer for you. The spring has a sturdy…

view full answer...

Answer 3

I completely understand your troubles and confusion with leaf springs. First do remember there are different types of spring steels so the thickness of the leaves is not always the best way to judge the weight capacity for the leaf springs. So while…

view full answer...

Answer 4

I checked with CE Smith and you will want to torque the 1/2" bolts of the U-Bolt Kit item #CE23003 to 65 ft lbs.

view full answer...

Answer 5

Based on my research, your Dexter leaf spring is a double-eye leaf spring with a 3,000 pound capacity for your 6,000 pound axle. The original length of your existing springs is 25-1/4 inches. As springs tend to stretch a bit over time, your existing…

view full answer...

Answer 6

There are a couple ways to verify if the 6-Leaf Double-Eye Spring for 5,300-lb Trailer Axles #SP-222275 is the correct size for your Forest River Cherokee 25pack12. First if you can find the axle tag information stickers on the back of your axles I…

view full answer...

Answer 7

To replace the U-Bolt kit on your 5.2K axles I recommend the following kit: - Replacement U-Bolt Axle Mounting Hardware Kit #LC27XV This comes with U-Bolts for 3" diameter axles, the mounting plate, and the hardware needed to get everything…

view full answer...

Answer 8

Your 2017 Keystone Montana M-3160 RL will have 7K axles which means you'll have a U-Bolt kit similar to CE Smith U-Bolt Kit #CE23003 which needs to be torque to between 45 ft/lbs - 70 ft/lbs.

view full answer...

Answer 9

The 6-Leaf Double-Eye Spring for 7,000 pound Trailer Axles #e64SR is 24-7/8 inches long and since your springs measure out to be 26 inches when fully loaded these springs will work on your 2014 Heartland RV Landmark Fifth Wheel. The springs have a…

view full answer...

Answer 10

I spoke with my contact at Dexter and the 6,000 pound axle rating on the E-Z Flex Heavy Duty Rubber Suspension System #K71-652-00 has more to do with fit than the actual capacity on the equalizers. Heavier duty axles will typically have different…

view full answer...

Answer 11

To correctly measure a leaf spring, you'll want to jack the trailer up on jack stands so the axle is hanging freely, then measure directly across from the center of one spring eye to the other, as shown in the provided diagram. The height of the…

view full answer...

Answer 12

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

view full answer...

Where Are 25-1/4" Long 5-Leaf Double-Eye Spring for 6,000-lb Trailer Axles Made

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching