Will E-Z Flex System # K71-652-00 Replace Equalizers with 5-3/5 inch Bolt Hole Spacing on Winnebago
Question:
I have a 2017 Winnebago 2401RG travel trailer. The distance between the axles is 30inch but the measurements on the current system from bolt hole to bolt hole on the short side is 3 3/4 and the bottom long side is 5 3/5. Can i use your Dexter part number K71-652-00 on my trailer? It is a tandem axle trailer with a axle weight of 3500 lbs.
asked by: Bill H
Expert Reply:
As long as your existing equalizers feature a bolt hole spacing that matches the equalizers for the Dexter E-Z Flex Rubber Suspension System # K71-652-00 the axle spacing isn't really a concern.
Based on the measurements you provided of your existing equalizers this kit should work great. These E-Z Flex Equalizers will replace those that have a distance of 3 to 4 inches between the top and bottom bolt hole on center and between 5-1/4 inches and 6-1/4 inches between the bottom 2 bolt holes, on center.
I have attached an image to assist along with a helpful installation video.
Product Page this Question was Asked From
Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Tandem Axle - 6,000 lbs
- Trailer Suspension Parts
- Equalizer Upgrade Kit
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 5-5/8 Inch Long
- Tandem Axle
- Dexter
more information >
Continue Researching
- Q&A: Can The MORryde Suspension Upgrade Kit MR46ZR Be Used With Lippert Road Armor Equalizers
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps
- Shop: Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Tandem Axle - 6,000 lbs
- Shop: MORryde Rubber Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K
- Video: Dexter E-Z Flex Heavy Duty Rubber Suspension System Installation
- Article: How to Tell the Weight Rating of a Trailer Axle
- Search Results: dexter trailer leaf spring suspension
- Article: How to Measure a Trailer Axle
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Video: Review of Lippert Components Trailer Leaf Spring Suspension - Spring Mounting Hardware - LC122487
- Video: Review of MORryde Trailer Leaf Spring Suspension - Spring Mounting Hardware - MR46ZR
- Video: MORryde Tandem Axle Trailer Suspension Upgrade Kit Installation
- Shop: E-Z Flex Equalizers - Double-Eye Springs - Tandem Axle - 8,000 lbs - Qty 2
- Q&A: What is the Overall Length of the Bolts in the MORryde Wet Bolt Kit with 2-1/4 Inch Shackles
- Q&A: Dexter E_Z Flex Equalizer Upgrade for a 2004 Gulf Stream Ameri-Lite Camper
- Q&A: Replacement Hanger Bolt For Toy Hauler Using Equa-Flex Suspension Equalizers
- Q&A: Is Lippert Wet Bolt 126238 Available For Grand Design Reflection
- Q&A: How to Tell If MORryde Rubber Equalizers Will Fit Trailer
- Q&A: Recommended Replacement Wet Bolts For 5th Wheel Suspension System
- Shop: Lippert AP Kit - Tandem Axle Road Armor Wet Bolts and Shackles
- Shop: Dexter Bronze Bushings - Qty 4
- Shop: Replacement Standard Shackle Link - 2-1/4" Long - Zinc - Qty 1
- Video: CE Smith U-Bolt Kit for Round Trailer Axles Review
- Video: Review of Lippert Trailer Leaf Spring Suspension - U Bolt Axle Mounting Hardware Kit - LC27XV
- Video: CE Smith Trailer Suspension - Leaf Spring Suspension - CE23003 Review
- Search Results: bronze bushings
- Article: How to Accurately Measure Trailer Leaf Springs