Does the Yakima OverHaul HD Ladder Rack Fit the 2023 Ford Ranger Nextgen XLT?

Question

Question:

Yakima OverHaul HD Ladder Rack System for the new Ford Ranger Nextgen 2023 model XLT Australia. Hi Does Yakima OverHaul HD Ladder Rack System With 60inch Crossbars fit to the the new ford ranger 2023 Nextgen model XLT Supercrew with 5foot bed ? Thanks

asked by: Jacques V

0

Expert Reply:

Yes, it will but if your 2023 Ford Ranger Nextgen XLT comes equipped with the Ford Sportsbar then you won't be able to mount the front uprights close to the cab. The Sportsbar mounts in the same location and the way the support bars angle in block the uprights for the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack item # Y01151-57.

I have linked an installation video below to help you get this system set up.

expert reply by: Jerred H

0

Answer 1

We aren't aware of any changes that Yakima made to their Overhaul HD system with the part #Y01151-57 and the adapter that fits it to the Retrax rails part #Y01155 but we are aware that if you go lighter on tightening the knobs of the rack feet…

view full answer...

Answer 2

Because your boat is so wide and long, I recommend going with a ladder rack instead of a roof rack. A good one to use is the Yakima Overhaul HD, part #Y01151-57. They are 60" long aero-style bars, making them compatible with almost any…

view full answer...

Answer 3

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 4

You are exactly in the middle between the two sizes of the Yakima Sidebars for the Overhaul HD ladder racks. So what you'd need to do is decide if you'd rather spread the uprights out a little more or push them in closer together to match up…

view full answer...

Answer 5

When it comes to installing The Timbren Rear Suspension Enhancement System #TFRRGR on your 2020 Ford Ranger they come in a pair. The Timbren springs has a 6,000 pound weight capacity, and no drilling is required during the installation. I attached an…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Mad-Ramps states that the part #MR54FR is best suited for ATVs/UTVs with one row of seats but if the width of your golf cart is less than 60 inches and the wheel base is less than 88 inches this would work for you.

view full answer...

Answer 8

The newer Ford trucks feature what's dubiously referred to as a 'smart' trailer connector. The connector won't send any power back on the 12-volt accessory circuit (which powers the Echo) until the vehicle is turned on, the…

view full answer...

Answer 9

Sounds like you've done a great job at installing the Redarc Tow-Pro Elite #RED44FR, and that you're on the right track when it comes to installing the Hopkins Endurance Multi-Tow Plug #HM47180 on your 2019 Ford Ranger! To wrap up your…

view full answer...

Answer 10

The only trailer brake controller options we offer for a 2019 Ford Ranger are wireless since there is no trailer brake controller plug under the dash. I recommend the Curt Echo Wireless Brake Controller part #C51180 which you will control and setup…

view full answer...

Does the Yakima OverHaul HD Ladder Rack Fit the 2023 Ford Ranger Nextgen XLT?

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching