How To Does A SmartPlug Power Cord Connect To A Shore Power Pedestal

Question

Question:

I dont see how the Smart Plug can be plugged into a standard rv park 30 amp receptacle. With the prongs of the Smart Plug being recessed, it seems impossible. Thank you for your help.

asked by: Gary O

1

Helpful Expert Reply:

The SmartPlug RV Power Inlet # SM97FR would be wired to the trailer and would be paired with a SmartPlug power cord, like part # SM59FR, that has a matching connection for the inlet and a standard 30 amp connector on the other end to connect to the shore power pedestal.

expert reply by: Kevin C

1

Answer 1

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 2

Yes, your 2019 Subaru Crosstrek with a manual transmission is flat-towable. You'll need a few things to do this. First is a base plate kit. For that you'd want the Roadmaster Direct Connect kit part #RM-52927-5 which is custom fit for your…

view full answer...

Answer 3

Yes, the conical cordseal and install tool is indeed included with the SmartPlug RV Power Inlet and Connector - 30 Amp - White #SM77FR.

view full answer...

Answer 4

You can change your cam locks to slam latch locks but it will take modifying your hatch doors. You can use the Global Link RV Baggage Door Slam Latch with Keyed Alike Option - Black - 1-1/2" Thick #295-000015 along with the Global Link Mounting…

view full answer...

Answer 5

There's quite a bit of variance in how the gas line of your 2021 Keystone Cougar can be ran and how it would need to be repositioned to to install the SumoSprings part #SS26MV which is why their included relocation kit offers several ways it can…

view full answer...

Answer 6

For your Forest River Sandpiper 5th wheel with 6,000 lbs axles, I recommend the Roadmaster Comfort Ride Shock Absorbers for Tandem Axle Trailers item #RM-2460. This system fits tandem axle trailers with 3" diameter 5,200 lbs -7,500 lbs axles. It…

view full answer...

Answer 7

Shock absorbers are going to make the biggest difference in smoothing out your ride quality as they get rid of the bounciness. SumoSprings would help a little bit but without the dampening that shocks provide most of the smoothness. I believe your…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

The SmartPlug RV Power Inlet #SM97FR would be wired to the trailer and would be paired with a SmartPlug power cord, like part #SM59FR, that has a matching connection for the inlet and a standard 30 amp connector on the other end to connect to the…

view full answer...

Answer 10

You are correct that the Jeep bracket should have been reinstalled when installing the Blue Ox Base Plate #BX1139. I have linked another video near the bottom of the page where you can see the brackets being reinstalled on a 2020 Jeep Wrangler around…

view full answer...

How To Does A SmartPlug Power Cord Connect To A Shore Power Pedestal

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching