Can The Roadmaster StowMaster Tow Bar Be Converted To Connect To A Pintle Hitch

Question

Question:

I bought base plate and RM-501 tow bar from you, and I love how they work. Is there a way to hook the RM-501for 2 ball to a pintle hitch?

asked by: Dennis R

0

Expert Reply:

Yes, you can replace the 2" ball coupler of the StowMaster # RM-501 with the Replacement Coupler Arm Assembly for Roadmaster StowMaster with Lunette Ring # RM-C001890 for a 2-1/2" ID lunette ring.

expert reply by: Kevin C

0

Answer 1

The shortest pintle hook option we have is the Curt SecureLatch Pintle Hook for 2" Hitches #CU24FR which measures 9" from the center of the hitch pin hole to the center of the pintle hook. Please note that you need to make sure that your…

view full answer...

Answer 2

We have not had anyone come to us with specific problems related to a 2011 Nissan Versa hatchback and tow bar wiring kit #RM-155. There are some things about the bulb and socket kit that you need to be aware of. There is drilling involved with the…

view full answer...

Answer 3

We have the replacement coupler and driver side arm that does fit the Stowmaster #RM-501 with the part #RM-910018-00 but the part number you mentioned is not the correct fit.

view full answer...

Answer 4

It sounds like you are looking for a hitch mounted pintle hook to use the lunette ring mounted on your military trailer. If that is the case then the Curt Pintle Hook part #C48004 is what I recommend. That said, there really isn't one that will…

view full answer...

Answer 5

Pintle hitches are made to fit certain sized Lunette rings. The rings that we carry are only available in 2-1/2" or 3" diameter sizes. For example, the Curt Pintle Hook for 2" Hitches #C48004 fits lunette ring couplers with a minimum…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 9

Whether or not you can flat tow with a Jeep bumper is really up to the manufacturers testing; some of the big names like MetalCloak or Poison Spyder have bumpers with D-ring attachments that can be used for flat towing connections. This is great…

view full answer...

Answer 10

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Hello Curtis. You can absolutely use an RV mount tow bar with your 2006 Ford E350 Van. For example, the Blue Ox Avail Non-Binding Tow Bar #BX7420 is compatible with any 2" hitch receiver. This could be on a motorhome, van or pickup truck. As…

view full answer...

Can The Roadmaster StowMaster Tow Bar Be Converted To Connect To A Pintle Hitch

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching