Does Westlake ST205/75R14 Have Steel Sleeve Where Lug Nuts Seat

Question

Question:

What is the seat for lug nuts?

asked by: James R

0

Expert Reply:

The Westlake wheel and tire part # WST57FR has a steel sleeve where the lug nut seats so you wouldn't have to worry about corrosion of dissimilar metals when using this with steel lug nuts.

expert reply by: Jameson C

0

Answer 1

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 4

Good morning, Cliff. As of today (3/27/24) we are expecting the #KE33JR tire/wheel combo to be in stock in about 2 weeks. Hopefully this means we can take our own pictures and put them on the site within maybe about 3-4 weeks from now. What I can…

view full answer...

Answer 5

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 6

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...

Answer 7

The 12 inch tires that we carry are rated for 65 miles per hour. Any faster than that for extended periods and the excessive heat build up will cause tire failure. To get a tire with a higher speed rating you would have to go up in size. That also…

view full answer...

Answer 8

You can add larger wheels and tires to a trailer as long as you have enough room for the larger size. The main clearance issues we find when putting larger tires and wheels on a trailer is from the top of the tire to the fender and from the inside…

view full answer...

Answer 9

We have an aluminum 7 spoke 14 inch trailer wheel that looks pretty close to the wheel in the picture you sent us, but it's not an exact match. For that wheel you would want the part #AM22329. For a 205/75R14 you can use #AM10234 or tire #AM10229…

view full answer...

Answer 10

The main difference between a ST205/75-14 size tire like the Contender #AC14R45SM and a ST215/75-14 size tire like the Taskmaster Provider Item #TTWTR21514 is that the larger number is a slightly larger size. The 205 has a section width of 7.99"…

view full answer...

Answer 11

The Westlake wheel and tire part #WST57FR has a steel sleeve where the lug nut seats so you wouldn't have to worry about corrosion of dissimilar metals when using this with steel lug nuts.

view full answer...

Answer 12

The Aluminum Hi-Spec Series 6 Trailer Wheel #AM22651 does include its own center cap. So you will not need to use any other cap. The wheel is designed to work with 1/2-20 60-degree lug nuts and you can use a basic Lug Nut #CE11051.

view full answer...

Does Westlake ST205/75R14 Have Steel Sleeve Where Lug Nuts Seat

Product Page this Question was Asked From

Continue Researching