Manual Ball-Mount Trailer Dollies For A NuCamp T@B 320
Question:
I am looking for trailer dolly that I can use to maneuver my TAB 320 boondock around in a tight space next to my house. A potential issue is that most of the Dollie’s that I see on your site are tongue mounted, not ball mounted. On my TAB, ther is little to no space on the arms of the tongue to mount a dolly. There is a tongue mounted diamond plated tongue box that extends to the beginning of a triangular plate through which the tongue jack is mounted see attached photo. If I remove the tongue jack, can the triangular plates be removed so that I can mount a dolly/jack combo. Any other suggestions?
asked by: Jay T
Expert Reply:
Looks like most of that is welded in place so removing it would be a bit of a challenge. We do offer some manual trailer dollies to help maneuver your trailer around though. If you have a 1-7/8" coupler then you can use the Flint Hill Goods Trailer Dolly # FHG84ZR, which can handle up to 600lbs in tongue weight. For a 2" coupler you'd need the Trailer Valet XL Trailer Dolly with Chain Drive # TVXL2, which can handle up to 1,000lbs of tongue weight. This also comes with a drill bit attachment to help move the trailer so you're not have to hand crank it around.
Products Referenced in This Question
Flint Hill Goods Trailer Dolly - 1-7/8" Hitch Ball - 600 lb Tongue Weight
- Trailer Dolly
- Manual Dolly
- 600 lbs Capacity
- 17 Inch Tall
- Steel
- 1-7/8 Inch Ball
- Black
- Flint Hill Goods
more information >
Trailer Valet XL Trailer Dolly with Chain Drive - 2" Hitch Ball - 10,000 lbs
- Trailer Dolly
- Manual Dolly
- 10000 lbs Capacity
- 19 Inch Tall
- 20 Inch Tall
- Steel
- 2 Inch Ball
- Black
- Trailer Valet
more information >
Product Page this Question was Asked From
Ball Mount 3/4" Rise or 2" Drop - 12-5/8" Long
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 1 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Long Shank
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Ark Xtreme Off-Road Ratcheting Jack w/ Wheel - Sidewind - 18" Lift - 770 lbs
- Shop: Trailer Valet XL Trailer Dolly with Chain Drive - 2-5/16" Hitch Ball - 10,000 lbs
- Shop: Trailer Valet XL Trailer Dolly with Chain Drive - 2" Hitch Ball - 10,000 lbs
- Shop: Flint Hill Goods Trailer Dolly - 1-7/8" Hitch Ball - 600 lb Tongue Weight
- Shop: A-Frame Trailer Coupler w/ Round Jack Hole - Squeeze Latch - Black - 2-5/16" Ball - 15,000 lbs
- Shop: Sleeve-Lock Trailer Coupler - Adjustable Channel Mount - Black - 2" Ball - 7,000 lbs
- Shop: Trailer Valet Combo Ball Tower Mount for RVR Trailer Dolly - 2-5/16" Hitch Ball
- Search Results: trailer tongue extension
- Search Results: tongue bracket
- Search Results: trailer dolly with 2 inch ball
- Video: Ark Xtreme Off-Road Ratcheting Trailer Jack Review
- Q&A: Will Trailer Valet Trailer Dolly Move a 6,000 Pound Trailer at 90 Degrees Up Hill
- Q&A: Recommended Powered A-Frame Trailer Jack for a T@B 320 Teardrop Camper
- Q&A: What do I Need to Tow My 2021 Nucamp TAB 320S with My 2021 Jeep Wrangler Unlimited Rubicon?
- Q&A: Will a Dolly Work To Move Around a 2,800 Lb Boat Trailer
- Q&A: Is There a Pneumatic Trailer Jack Wheel Available
- Q&A: Replacing Flat Plate on Trailer Jack With a Replacement Wheel
- Q&A: Will Replacing Jack Foot Plate With Caster Wheel Reduce Jack Weight Capacity or Trailer Capacity?
- Video: Flint Hill Goods Trailer Dolly Review FHG84ZR
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Search Results: trailer jack
- Article: Trailer Tire Sizing
- Shop: Trailer Wiring
- Search Results: trailer valet
- Article: Most Popular Wheel Bearings
- Video: Ark Extreme Off-Road Trailer Jack Review
- Shop: Brake Controller
- Search Results: trailer dolly
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)