Recommended Front Mount Hitch for a 2023 Ram 2500

Question

Question:

Is there a front mount hitch other then the Ecohitch EH37FR that fits a 2023 Ram 2500 diesel?

asked by: Everett

0

Expert Reply:

Yes, there is. The Curt Front Mount Hitch item # C31089 is confirmed to fit both the gas and diesel models of the 2023 Ram 2500. It has a 2" receiver that sticks out at the bottom of your Ram's front trim. This hitch has a 500 lbs vertical load limit and a 5,000 lbs gross trailer weight.

expert reply by: Jerred H

0

Answer 1

Yes, it does fit the diesel 2023 Ram 2500 trucks. Our website can be confusing sometimes when it comes to diesel engines but I assure you that the EcoHitch Hidden Front Mount Trailer Hitch item #EH37FR fits both the diesel and gas models. This front…

view full answer...

Answer 2

Because of the overhang from a 5th wheel trailer the best solution for transporting a couple of kayaks while towing is with the combination of a single bar rack for the cab and a front-mounted load extender that installs into a front-mount hitch. For…

view full answer...

Answer 3

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 4

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 5

While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the 1.6" ID and 2.5" OD measurements you provides, that is very close to our #58846. This particular grease…

view full answer...

Answer 6

The 7290 that you see is a casting number. It is found on AL-KO hubs that fit #99 spindles. I found that the bearings used are #28580 which would be the inner bearing and #25580 which would be the outer bearing. For the seal use #91030.

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 9

The AL-KO trailer hub part number 8700 that you have is a 3,500 lb trailer hub/drum with a 5 on 4-1/2 inch bolt pattern. Based on that the #AKHD-545-35-EZ-K is the correct fit and would work great.

view full answer...

Answer 10

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 11

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Answer 12

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Recommended Front Mount Hitch for a 2023 Ram 2500

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching