Where Are AMPLock Products Made

Question

Question:

Where is this item made

asked by: Derek C

0

Expert Reply:

AMPLock products like the # AMP37FR are made in Canada. Their headquarters is in Drummondville Quebec Canada.

expert reply by: Jesse M

0

Answer 1

I don't have a way to verify fit of the AMPLock Trailer Hitch Receiver Lock part #AMP37FR on a 2020 Toyota Tacoma but we can offer you this same pin with a longer usable span, the AMPLock Trailer Hitch Receiver Lock for 2-1/2" or…

view full answer...

Answer 2

The Westin Truck-Pal Fold-Up Bed Ladder, Item #10-3000 is a universal fit that would work great on your F-150. It is mountable on trucks with bed covers and tailgates on trucks that are 38 inches or less from the graound. The ladder stores on and…

view full answer...

Answer 3

The Westin Truck-Pal Fold-Up Ladder, #10-3000, will not interfere with your hard top tonneau cover if the mounting brackets are positioned correctly on your tailgate. The mounting brackets have a sliding bracket that allows the steps to slide on…

view full answer...

Answer 4

Yes, the ladder portion of the Westin Truck-Pal Fold-Up Bed Ladder, part #10-3000, can be removed from the mounting bracket when not in use.

view full answer...

Answer 5

The Roadmaster Quiet hitch would be a great choice. You might actually need two of the Roadmaster Quiet Hitch Anti-Rattle Devices. You'll need part #RM-061-125 for the connection between your adapter and the receiver hitch, and the Quiet…

view full answer...

Answer 6

In order to lock a Demco Tow Bar like the Demco Excali-Bar III Non-Binding Tow Bar part #DM9511013 you'll need the Demco Base Plate and Receiver Lock Kit part #DM9523068 which comes with locks to secure the tow bar to the motorhome and the tow…

view full answer...

Answer 7

Demco rates their Base Plate and Receiver Lock Kit #DM9523068 to match the weight of their tow bars like the Demco Excali-Bar III Non-Binding Tow Bar #DM9511013 which is up to 10,500lbs. As they only designed them for this single purpose you will not…

view full answer...

Answer 8

AMPLock products like the #AMP37FR are made in Canada. Their headquarters is in Drummondville Quebec Canada.

view full answer...

Answer 9

You definitely have a set of Lippert Equa-Flex equalizers on your 2019 Weekend Warrior and it looks like they are the part #LC279687 that you referenced. How often to grease the wet bolts depends on how much use the trailer gets. If you do not use it…

view full answer...

Answer 10

It is possible to upgrade the leaf springs on a trailer to a higher rated set but I do not recommend this as it can create a rough ride. The better option would be to install the SumoSprings Trailer Helper Springs part #TSS-107-40 for overslung or…

view full answer...

Answer 11

Kenny, those bolts for the B&W Companion 5th Wheel Trailer Hitch #BWRVK3500-5W should be torqued to 40 ft. lbs. Also, the pivot arms would need to be torqued to 80 ft. lbs, the draw down bolt should be tighten to 60 ft.lbs and the arms should be…

view full answer...

Where Are AMPLock Products Made

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching