Can Curt Replacement Breakaway Switch be Used With RVI

Question

Question:

Is this the correct breakaway switch replacement for the RVI break. The one I have says Curt on it but it does not have a model number.

asked by: Bill M

0

Expert Reply:

Yes, you can use the Replacement Switch for Curt Soft Trac I and II Trailer Breakaway Kits # C52010 with your RVI kit.

expert reply by: Kyle S

0

Answer 1

On your 2018 Ford Focus the Roadmaster Battery Disconnect with Switch #RM-766 can only be used on the positive terminal of the battery as that is what the polarity of the solenoid is designed for, per Roadmaster.

view full answer...

Answer 2

The reason a vehicle has to have the battery disconnected when being flat towed like with your Ford Focus is that the ignition has to be in a specific position for the steering wheel to unlock which turns on several circuits which would drain the…

view full answer...

Answer 3

Some vehicles require disconnecting the negative battery cable when flat towing them to prevent battery drain. If you have installed the Roadmaster Automatic Battery Disconnect #RM-766 you will not need to do this since this item includes a switch…

view full answer...

Answer 4

On page 317 of the owner's manual of a 2019 Chevy Colorado it states that failure to disconnect the negative battery cable can cause damage to the vehicle, and this is referring to the electronics of the truck which could potentially be damaged…

view full answer...

Answer 5

The #RM-766 is the correct part to disconnect the battery on your 2015 Ford Edge and I do recommend this part for an easy way to protect your vehicle without needing to move wires each time. This disconnect makes it as easy as a flip of the switch on…

view full answer...

Answer 6

The Trailer Hub and Drum Assembly #AKHD-865-7-2-K is the same as the Assembly #AKHD-865-7-1-K you found but with 1/2" wheel studs versus the 9/16". We also have the Assembly #AKHD-865-7-2-EZ-K if you need the EZ Lube grease cap to access…

view full answer...

Answer 7

Yes, breakaway switches like the Replacement Switch for Curt Soft Trac I and II Trailer Breakaway Kits part #C52010 are universal in fit. They can be used with pretty much any system no matter the brand. The wires are also not polarity specific so…

view full answer...

Answer 8

I checked with Demco and their Tabless Base Plate Kit item #DM29FR is exactly what you need to flat tow your 2023 GMC Sierra 1500 with a Excali-Bar III Tow Bar item #DM9511013. This is custom fit and works with all models of the 2023 Sierra 1500…

view full answer...

Answer 9

I would be happy to! To flat tow your 2024 GMC Canyon Denali you will need the following parts: Tow Bar and Safety Chains - Roadmaster Nighthawk All-Terrain Tow Bar w/ LED Lights item #RM-676 Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 12

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Can Curt Replacement Breakaway Switch be Used With RVI

Product Page this Question was Asked From

Continue Researching