Replacement Bracket, Bolts & Nuts For Thule Hullavator 897XT

Question

Question:

I need 4 brackets, bolts and nuts to attach a pair of Thule Hullavator 897XT to a 1”Yakima round bar on a 2010 VW Golf AND / OR a factory installed roof rack on a 2014 Ford Transit Mini.

asked by: Charlie T

0

Expert Reply:

We do have the brackets, bolts, and nuts needed to attach your Thule Hullavator 897XT to the round bars. What you need are the following parts:

- Replacement Underbar Bracket # TH8535860

- Replacement M6 x 22 Carriage Bolt # 915-0622-54

- Replacement Round Nut # 853-5439

expert reply by: Kyle S

0

Answer 1

According to Thule, fit kits like the #THKIT3131 are pre-packaged in Sweden and shipped to the US as a complete unit. Unfortunately, this means that the only option for bolts and other hardware is to purchase the complete fit kit since Thule does not…

view full answer...

Answer 2

We do not have any photos or visuals on how the Replacement Aeroblade Shim for Thule Hullavator Kayak Carrier, part #TH56JV, attaches, but I can explain it for you. The curved portion is meant to attach upward into the bottom of your older Hullavator…

view full answer...

Answer 3

Your older style Thule Hullavator is designed to fit Thule Aeroblade bars but it mounts to them in the channels that are on top of the bars and not by wrapping around them. The bolts needed are part #919061654 which then thread to the square nut…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 6

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 7

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 8

Thanks for reaching out to verify, Frank! Yes, those parts (listed below) will fit great together and on your 2010 Honda Accord Crosstour with the naked roof. Inno Roof Rack - Aero Crossbars #INXB130-138 - Through Feet #INXS250 - Fit Kit #INK587 The…

view full answer...

Answer 9

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Hey Alec, For your 2016 Ford Fusion I recommend the recommend a roof rack from Inno: Inno Aero Crossbars #INXB138-145 Inno Through Feet for Aero Crossbars #INXS250 Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet #INK860 As with any…

view full answer...

Answer 12

The Malone Universal Crossbar System #MPG201 is a more economical choice but it still does a good job. The design and quality of Thule's system is why they have such a large difference in price. Whether you go with the Thule Crossroads system…

view full answer...

Replacement Bracket, Bolts & Nuts For Thule Hullavator 897XT

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching